Thanks for the reply Sarton, I'm in the process now of flashing in another load onto the Neo. I have the SD card that came with the Neo. I'm running from FLASH right now. I never put a load on the SD.
I'm not so sure I would accuse the boot loader unless there's something you know that I don't. The system does start to boot but it fails somewhere along the way. The kernel is loading but fails while loading modules I think. I noticed that when it has stopped writing to the console I can then plug in or remove the USB cable and I get the usual module load/unload output to the console. I'm beginning to suspect that the X server is dying. Unfortunately, I can't get at the device through a console to muck about with it. Cheers!! On Tue, Dec 16, 2008 at 6:05 PM, <roguem...@roguewrt.org> wrote: > john dowd wrote: > [SNIP] >> My point is that without modifying files on my Neo, it starts to >> behave differently. >> >> I have even more strange behaviour to report. After several reboot >> attempts (but no modifications to the Neo) it suddenly booted properly >> and I was up and running again. This was true for the last few hours. >> Now, it just started to behave badly once again. I am still testing my >> Access Point and the Neo gets "booted" quite a few times. its plugged >> into the power supply. Since I want the Neo to come up on its own I >> don't use the power switch/Gui to turn it off. I bring up a terminal >> and type in "reboot". > > Ah ... are you running from SD Card already or from flash? > > This sort of behaviour is typical of unsupported SD Cards. If you are > running from SD, what size is it? There are some tricks to get some > cards working but I have had success with all 2GB cards. > > If you are running from nand, all I could suggest is a u-boot upgrade. > Outside of that maybe there are hardware issues? > > Sarton > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > -- John Dowd jd...@slashdevslashnull.org 133 Waverley St. Ottawa Ont. K2P 0V3 Home: (613)234-7884 Cell: (613)316-7884 _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community