Hi Tilman Baumann wrote: > Hi, > > I have just flashed Qi and have two questions. > > First, http://wiki.openmoko.org/wiki/Qi clearly states that the boot > menu via power+aux will still work. > I was sceptical about how that should work since gta01 has no NOR flash. > But I trusted the source. Needless to say that there is no boot menu! > Am I right in assuming that the wiki is just BS in this regard? > If that is so, I like to change the text to warn others. > > And, how can I get my device in DFU-Mode now? Am I right in assuming > that Qi has none? > Does this mean that when I trash my rootfs I have no way to re-flash? > How would I write a new bootloader (or whatever) to NAND via a running > system? > the WIKI means the GTA02 NOR flash still work, so in GTA01, if you flash the Qi, you will lose the "Boot Menu" and DFU-Mode.
you must have debug board to flash the u-boot back. i have no idea about write new bootloader via running system. > And secondly. I did flash Qi because booting from SD with U-Boot as > described in the Wiki did not work for me. > Somehow u-boot was not able to read the SD (8gb SDHC). > (Sorry, I have no exact error message because I stopped debugging when > the USB console trashed my hosts USB subsystem) > > I thought maybe Qi does it right. > I have a SD with one ext2 formated partition containing the rootfs and > /boot/append-GTA01 and /boot/uImage-GTA01.bin > > But it still always boots from NAND. > > I tried /boot/append-GTA01 with rootfstype=ext2 root=/dev/mmcblk0p1 but > this did not work either. you can try delete the /boot/append-GTA01, and try again. hope this can help > > Any ideas? > > > PS: Remember GTA01! Some people seem to forget them. ;-) > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community