Ok, that made it even worse :(
Now I only have NOR uBoot and dfu-util still gives me only 1 alternate
there which is "USB Device Firmware Upgrade".
Cannot flash the NAND uBoot, since dfu-util does not see the required
partition...
Vasili
Mike Montour wrote:
Vasili Sviridov wrote:
Hello All,
Since both my previous posts haven't helped me to fix my phone looks
like I need to devirginate it. Unfortunately I do not have the debug
board, and paying $100 + shipping is a bit steep for just one thing to do.
Is there anyone in Vancouver, BC that has one and willing to help me to
get my Moko working - please respond.
I have a v2 (Neo1973) debug board in Vancouver, but you shouldn't need
it if you have a Freerunner with a working NOR u-boot.
I haven't read all of the previous messages in this thread so someone
else might have already said this, but I would:
- Boot into NOR u-boot
- Erase the NAND ("nand erase" or "nand createbbt")
- Exit from the u-boot console
- Flash a new u-boot ("dfu-util -R -a u-boot -D /path/to/u-boot.bin")
- Reboot into NAND u-boot, then enter the u-boot console
- Execute "dynpart", "dynenv set u-boot_env", "saveenv" to set up the
default environment variables
- Reboot into NAND u-boot again
- Download a new kernel + rootfs with dfu-util
- Fix up the rest of your environment variables through the u-boot
console.
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
