hey, i have been updating software on my freerunner last things i installed were pythm , mplayer then i uninstalled them, after a reboot the screen shows
"starting atd daemon:atd." last thing and nothing after, i tried running /etc/init.d/xserver-nodm start, and looked at log in /tmp/x.log # RUN INIT: /usr/bin/enlightenment_init '/usr/share/enlightenment/data/init/illume_init.edj' '1' '0' 'Enlightenment' '0.16.999.050' # Segmentation fault # ESTART: 1.77762 [0.95707] - test file format support # run-parts: /etc/X11/Xsession.d/90xXWindowManager exited with code 1011 # waiting for X server to shut down FreeFontPath: FPE "built-ins" refcount is 2, should be 1; fixing. this is with illume as default_profile, i change that to ASU and i get the following, i can see the booting screen with the green bar for around 0.2 second then back to the "atd" , now /tmp/x.log shows # RUN INIT: /usr/bin/enlightenment_init '/usr/share/enlightenment/data/init/asu_init.edj' '4' '0' 'Enlightenment' '0.16.999.050' # ESTART: 2.46682 [1.61394] - test file format support # run-parts: /etc/X11/Xsession.d/90xXWindowManager exited with code 1011 # waiting for X server to shut down E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0 # FreeFontPath: FPE "built-ins" refcount is 2, should be 1; fixing. where can i go from here!? another thing worth mentioning is that couple of days ago the thing stopped at "starting atd daemon:atd." again but Xglamo wasn't starting, i went to check /usr/bin/Xglamo to find that it's 0 bytes!, i just scp a new one from a 2008.12.tar.gz back to freerunner and it worked again.....
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community