Hi Ed,
My answers are bellow.
On Thu, Mar 26, 2009 at 5:56 PM, Ed Kapitein <e...@kapitein.org> wrote:
> Hi Tuan,
>
> Strange that no connection is made to the landline modem.
> you see no response, but dou you see the at commands echoed back?
>>> When I make data calls, I see AT cmd echo back with OK --> modem acepts
cmd.
>
> if not use ate1 to see the responses.
>>> I always use ATE1 at fisrt.
>
> you can restart /usr/sbin/gsm0710muxd with the -v option and use logread
> to see what is send and received from the modem.
>>> Woop, I never see this process via ps. I use qtextend and before doing
things with socat I always shutdown qtextend so I can connect to
/dev/ttySA0. Do I need this before making data calls? Actually I can make
voice calls by ATs without this.
>
> If you use the motorola to call your FR, can you pick up the call with
> the ATA command?
>>> Can, after seeing RING, I use ATH to accept.
>
> Do you see a "ring" message?
>
>
> Good luck !
> Ed
>
>
> On Thu, 2009-03-26 at 17:38 +0700, Tuan TRINH wrote:
> > Hi Ed,
> > Just try to initiate data call but no success.
> >
> > There is a strange symptom that is: If I use the same SIM but on other
> > mobile (Motorora Z8) I can hear the far end land-line modem sound
> > respone but if I use FR to call the same modem: (1) via AT commands I
> > see no response, both sound and response modem characters so can not
> > use expect(CONNECT) with ppp (2) via GUI, it drop the call.
> >
> > My FR can do voice call normally.
> >
> > Do you have any way to debug the status of data call while using AT
> > commands? I just know +CEER but it does not give much info.
> >
> > Cordially,
> > Tuan
> > On Wed, Mar 25, 2009 at 3:33 AM, Ed Kapitein <e...@kapitein.org> wrote:
> > Hi Tuan,
> >
> > I was able to make a datacall to a landline modem :-)
> >
> > So you can use your freerunner to dial in to an ISP if you
> > like.
> >
> > i wil paste the "proof" of my success below.
> > Now i just need to find a way to make it less expensive...
> >
> > Kind regards,
> > Ed
> >
> >
> > MODEM=$(dbus-send --system --print-reply --type=method_call
> > --dest=org.pyneo.muxer /org/pyneo/Muxer
> > org.freesmartphone.GSM.MUX.AllocChannel string:$identvar |
> > grep string |
> > awk -F '"' '{ print $2 }')
> >
> >
> > pppd nodetach debug call inbel "${MODEM}"
> ><SNIP><
>
> >
>
>
> _______________________________________________
> Openmoko community mailing list
> community@lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
