Hi, you can pull out the SPI/UART/I2C signals from the debug board if your sensor IC is SPI or UART or I2C interface.
another alternative is to find the testpoints according to this pic and solder out the connections from the test points to your IC. the test points are labeled accordingly and they surround the FPC connector. https://wiki.openmoko.org/images/a/a4/Gta02a5_pcba_ps.JPG KP On Mon, Apr 20, 2009 at 5:08 PM, Helge Hafting <helge.haft...@hist.no> wrote: > Anas Alzouhbi wrote: >> Hello! >> I like to connect a sensor (like gyroscope) to my smarthphone, how can >> I do this, or any one could give me a helpful document in this domain >> thank you > > The USB port on the freerunner can be used to connect usb devices. (See > the wiki for how this is done.) > > So, if you can get a device with a USB interface, then it is easy. > If you can't get that, get a device with a serial interface, and get a > serial-to-usb converter. > > And of course connecting via bluetooth or wifi is easy enough, but I > have not heard of any gyroscopes connectiong via such interfaces. :-/ > > Helge Hafting > > _______________________________________________ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
