As a matter of fact, it's really slow to tar -xf .tar file, compared with my 2440 demo board.
I takes me half a day to unzip the file system to sd card with fso image. If it's with my demo board to unzip, very quick, about 10min or so. What's wrong with fso image to unzip the tar package? On Thu, 2009-05-07 at 17:39 +0200, Rask Ingemann Lambertsen wrote: > On Tue, May 05, 2009 at 07:12:25AM -0600, Angus Ainslie wrote: > > > You could always use the .tar.gz on an sd card ( It boots way faster > > that way anyway :) > > NAND flash ought to be a lot faster than Glamo's MMC interface. Where is > the bug? FWIW, I tried a simple hdparm run on NOR flash, NAND flash and SD > card: > > r...@debian-gta02:~# hdparm --direct -t /dev/mtdblock0 # NOR flash > > /dev/mtdblock0: > Timing O_DIRECT disk reads: 2 MB in 1.24 seconds = 1.61 MB/sec > > r...@debian-gta02:~# hdparm --direct -t /dev/mtdblock3 # NAND flash > > /dev/mtdblock3: > Timing O_DIRECT disk reads: 8 MB in 2.89 seconds = 2.77 MB/sec > > r...@debian-gta02:~# hdparm --direct -t /dev/mmcblk0 # Glamo MMC > > /dev/mmcblk0: > Timing O_DIRECT disk reads: 8 MB in 3.46 seconds = 2.31 MB/sec > -- Daniel.Li <lida_m...@163.com> PALFocus (http://palfocus.oicp.net) _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
