dmesg has given me this, most of which i do not understand. but i did try adding ip address command to usb3 and terminal reported back cannot find device
usb 3-1: reset full speed USB device using ohci_hcd and address 2 usb 3-1: device descriptor read/64, error -110 usb 3-1: device firmware changed usb 3-1: USB disconnect, address 2 usb 3-1: new full speed USB device using ohci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=1d50, idProduct=5119 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Neo1973 Bootloader U-Boot 1.3.2-moko12 usb 3-1: Manufacturer: OpenMoko, Inc usb 3-1: SerialNumber: 0000000 usb 3-1: reset full speed USB device using ohci_hcd and address 3 usb 3-1: device descriptor read/64, error -110 usb 3-1: device firmware changed usb 3-1: USB disconnect, address 3 usb 3-1: new full speed USB device using ohci_hcd and address 4 usb 3-1: configuration #1 chosen from 2 choices On Sun, Jun 28, 2009 at 8:57 AM, jeremy jozwik<jerjoz.for...@gmail.com> wrote: > also... > > [r...@localhost sbin]# sudo ip address add 192.168.0.200/24 dev eth1 > Cannot find device "eth1" > > 1-8 exactly... > > > On Sun, Jun 28, 2009 at 8:55 AM, jeremy jozwik<jerjoz.for...@gmail.com> wrote: >> with the freerunner connected to machine: >> >> [r...@localhost sbin]# ./ifconfig >> eth0 Link encap:Ethernet blah blah blah >> >> lo Link encap:Local Loopback >> blah blah blah >> >> >> >> On Sat, Jun 27, 2009 at 11:57 PM, Robin Paulson<robin.paul...@gmail.com> >> wrote: >>> On 2009-06-28, Vikas Saurabh <vikas.saur...@gmail.com> wrote: >>>> On Sun, Jun 28, 2009 at 11:05 AM, jeremy jozwik<jerjoz.for...@gmail.com> >>>> wrote: >>>>> hello list. im in dire need of assistance. ive just re-flashed my >>>>> phone to shr-unstable 20090624 all went well until i tried to do an >>>>> ssh. turns out my usb0 is not showing up in anyway. >>>>> >>>> Try eth0. Recent kernels(I guess freerunner's driver) have started >>>> registering the device properly and hence it shows up as a network >>>> interface >>> >>> i doubt it will be eth0. more likely eth2 or something later >>> >>> run ifconfig to find out >>> >>> _______________________________________________ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >> > _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community