Is anybody working with or under qemu?
I tried follow wiki but svn repository has old dated address where it search images. svn checkout https://svn.openmoko.org/trunk/src/host/qemu-neo1973 cd qemu-neo1973 ./configure --target-list=arm-softmmu # GCC 3.x will be required, see --cc= make wget http://cc.oulu.fi/~rantalai/freerunner/qemu/env_om2009.diff patch -p0 < env_om2009.diff openmoko/download.sh openmoko/flash.sh arm-softmmu/qemu-system-arm -M gta01 -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor #It starts to boot menu, but selecting boot will reboot it back to boot menu. #I changed older u-boot (I didn't find it from official page, so I uploaded it) cd openmoko rm u-boot-* wget http://cc.oulu.fi/~rantalai/freerunner/qemu/u-boot-gta01bv4.bin cd .. #reflash and now kernel will start. first boot takes time. openmoko/flash.sh arm-softmmu/qemu-system-arm -M gta01 -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor #But it stopped 'paroli stopped unexpectable..." and mouse clicking doesn't respond #When I change kernel older one, I got it running (but there might be some problems with modules) cd openmoko rm u-Image* wget http://cc.oulu.fi/~rantalai/freerunner/qemu/u-Image-2.6.24-om-gta01.bin cd .. #reflash and now paroli will start. first boot takes time. openmoko/flash.sh arm-softmmu/qemu-system-arm -M gta01 -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor #Pressing enter (AUX) two seconds bring settings, but there are no display-entry, so I do not know how to continue with this. #Then I changed rootfs too to SHR (and renamed it, so we can use same flashing script) cd openmoko rm fso-paroli-image-om-gta01.jffs2 wget http://build.shr-project.org/shr-testing/images/om-gta01/shr-lite-image-om-gta01.jffs2 -O fso-paroli-image-om-gta01.jffs2 cd .. #reflash and now SHR will start. first boot takes time. openmoko/flash.sh arm-softmmu/qemu-system-arm -M gta01 -m 130 -mtdblock openmoko/openmoko-flash.image -kernel openmoko/openmoko-kernel.bin -usb -show-cursor Now I have SHR running with old kernel. Then I want ssh to it, but easiest way on wiki [1] uses pppd, which doesn't work on this kernel (missing modules). So I think this is dead end. This is only little bit better than famous 'Kernel is... not found', but maybe some one else want confirm this and try another solution? -Aapo Rantalainen [1] http://wiki.openmoko.org/wiki/Qemu _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community