Hi, Please keep the list Cc'd on useful discussions! Adding Cc back in assumption you dropped it by mistake.
Also please follow a well-established tradition to use the ``>'' symbol for quotations instead of indenting text. On Sat, Nov 07, 2009 at 12:30:59PM -0800, RANJAN wrote: > On Sat, Nov 7, 2009 at 12:10 PM, Paul Fertser <[1]fercer...@gmail.com> wrote: > RANJAN <[2]infi...@gmail.com> writes: > > Is there a free runner disassemble guide? > > If you search the wiki for Neo1973 (aka gta01) disassembly guide, > you'll find what you need. The instructions are the same for both > gta01 and gta02. > > Also was any one able the open the LCD and separate it into Touch > > panel,Backlit and the color screen?Please let me know. > > I don't think anyone ever tried. If you do, please share the results. > > Was able to remove the LCD from the metal sandwich kind casing.But there are > two > cords (highly delicate and flexible) which run from the LCD to the mother > board.One is shielded with some sort or metal tape which I did remove and the > other is glued. The flat cable with a small flexible shield glued on top of it is the one connecting the LCD Module (LCM) to the board. If you unlock the connector you'll be able to easily disconnect it. As to the links inside the LCM, that's an unknown territory, any reports (preferrably with photos) are appreciated. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
