[SOLVED] reading the SHR manual I noticed that: << Loading the Kernel A pair of u-boot commands must be used to load the kernel from SD. First is "mmcinit", which will cause u-boot to detect the card. Next is a command to load a file into memory - either "fatload" or "ext2load" depending on whether the kernel is on a FAT filesytem or an ext2/ext3 filesystem. The command syntax is: fatload mmc 1:<p> 0x32000000 <filepath> ext2load mmc 1:<p> 0x32000000 <filepath> where <p> is the partition number, and <filepath> is the path to the file that is to be loaded. >> but I passed the ext2load parameter to uboot without <filepath>. Uboot was not able to load uImage.bin because it was in /boot directory, a symlink of uboot.bin did the trick :)
-- View this message in context: http://n2.nabble.com/Debian-installed-on-uSD-ext3-using-uboot-tp4428642p4441374.html Sent from the Openmoko Community mailing list archive at Nabble.com. _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community