-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Aaaah, I think I got it ...
You call PISI the wrong way (meaning with invalid arguments); instead of providing detailed information about the data sources, you need to provide the section names as defined in the config file (the details are then defined in there). if you type pisi -l PISI will show you available sections. My guess is (with your config file), your call should look like: pisi -v shrsim vcf1 Please let me know if you need more input. Best Michael On 04/18/2010 06:06 PM, Tony Berth wrote: > indeed but didn't change anything on the default one - except of > excluding (comment out) some services. > > Attcahed the the conf file. > > On Sun, Apr 18, 2010 at 5:54 PM, Michael Pilgermann <kichka...@gmx.de > <mailto:kichka...@gmx.de>> wrote: > > Looks like a problem with your PISI configuration file > (/home/root/.pisi/conf) ... > > Any chance you could post the relevant part of your config (around dbus > configuration)??? ... I guess, there is some spelling mistake with > <<<contacts_dbussim>>> > > Best > Michael > > On 04/17/2010 08:28 PM, Tony Berth wrote: >> OK, this took some time (terrible sorry for that!) but now here is the >> requested output: > >> -------------- >> r...@om-gta02 ~ $ pisi -v contacts_dbussim contacts.vcf > >> ******************************************************* >> ********************** PISI ********************** >> ******************************************************* >> ** PISI is synchronizing information ****************** >> ** http://projects.openmoko.org/projects/pisi/ ******** >> ******************************************************* > >> *************** PHASE 0 - Configuration *************** >> Verbose mode on >> In case of conflicts I use the following strategy: Skip >> Reading configfile: /home/root/.pisi/conf >> Traceback (most recent call last): >> File "/bin/pisi", line 156, in <module> >> pisicli.startCLI() >> File "/opt/pisi/pisicli.py", line 215, in startCLI >> source = pisi.importModules(configfolder, config, modulesToLoad, >> modulesNamesCombined, soft) >> File "/opt/pisi/pisi.py", line 78, in importModules >> modulename = config.get( modulesToLoad[i], 'module' ) >> File "/usr/lib/python2.6/ConfigParser.py", line 531, in get >> raise NoSectionError(section) >> ConfigParser.NoSectionError: No section: 'contacts_dbussim' >> -------------------- > >> Thanks > >> Tony > >> On Tue, Apr 6, 2010 at 6:20 PM, Michael Pilgermann > <kichka...@gmx.de <mailto:kichka...@gmx.de> >> <mailto:kichka...@gmx.de <mailto:kichka...@gmx.de>>> wrote: > >> Hi tony, > >> this problem is still there? > >> Could you please start pisi from a shell and provide some debug > output?? > >> thx, best >> Michael > > >> On 04/06/2010 06:11 PM, Tony Berth wrote: >>> any chance to draw some attention to this one below? > >>> Thanks > >>> Tony > >>> ---------- Forwarded message ---------- >>> From: *Tony Berth* <tonybe...@googlemail.com > <mailto:tonybe...@googlemail.com> >> <mailto:tonybe...@googlemail.com <mailto:tonybe...@googlemail.com>> >>> <mailto:tonybe...@googlemail.com > <mailto:tonybe...@googlemail.com> <mailto:tonybe...@googlemail.com > <mailto:tonybe...@googlemail.com>>>> >>> Date: Mon, Apr 5, 2010 at 12:20 AM >>> Subject: [SHR-T-Latest] PISI problems >>> To: List for Openmoko community discussion >> <community@lists.openmoko.org > <mailto:community@lists.openmoko.org> > <mailto:community@lists.openmoko.org > <mailto:community@lists.openmoko.org>> >>> <mailto:community@lists.openmoko.org > <mailto:community@lists.openmoko.org> >> <mailto:community@lists.openmoko.org > <mailto:community@lists.openmoko.org>>>> > > >>> Dear Team, > >>> did a fresh install of the latest SHR-Testing image and tried to >> import >>> my SIM contacts via PISI. The progress bar goes up to: 'Finished >> (40%)' >>> and then stops. Needless to say that no contacts were imported. > >>> Thanks for your help > >>> Tony > > > >>> _______________________________________________ >>> Openmoko community mailing list >>> community@lists.openmoko.org > <mailto:community@lists.openmoko.org> > <mailto:community@lists.openmoko.org > <mailto:community@lists.openmoko.org>> >>> http://lists.openmoko.org/mailman/listinfo/community > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJLy2OeAAoJECyCaNMbCftRd8UIAKg7uZJDKyvghjLbwQ5YBb0X VVR0kzlXHf2tLhEQbsR6hmoN/kc+oYZkgCcX9RNClc0crKU6IiSRBFQ2NERnpCV8 gS6WP5ch/zMpb2GlQcUV32Ea3SwMf4E6Bhe9Vp61HO29o++ys03Ue6KNKxvj5bLW Y0e5DXmkC0nojezRogT14Z0xm920JCdHMgNvoDSp3y5dHqf6gTxVeFHSajqWnU9R yJB6EBIdGBZSSk3av/ox0qLazF3DCKuoCJOh9kX01osbgn42PRLw+XU+G7ANhCzb 6idl3VUYbT7w6C1S48vvb7xgDS8lswRDp8qbXsMyzbm0KzeyIrVhOzZev9S4kJs= =+bKk -----END PGP SIGNATURE----- _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community