In The Name Of Allah Hello This is answer of stefan schimdt (dfu-utils developer) :
"The number of shown partitions is hardcoded atm to DFU_NUM_ALTERNATES which is set to 6. So you last partition does not get shown increment it to seven in your board config and re-compile your u-boot and test again." but unfortunately ,have not board here ,would someone recompile it ? On Sun, Jan 22, 2012 at 12:52 AM, a dehqan <dehqa...@gmail.com> wrote: > > Thanks have tried: > > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > Now printenv shows: > > > mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) > > but when want to try dfu-utils -l shows: > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=1, name="u-boot" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=2, > name="u-boot_env" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=3, name="kernel" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=4, name="splash" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=5, name="factory" > Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=6, name="system" > > > again there is no userdata > > On Fri, Jan 20, 2012 at 11:33 AM, Jose Luis Perez Diez < > jl...@escomposlinux.org> wrote: > >> El Thursday 19 January 2012 17:52:46 a dehqan va escriure: >> > Thanks methink so >> > Have installed uboot on NAND and have set enviroments on it , this is >> > mtdparts output http://pastebin.com/E08fHr2G and this is printenv >> output >> > http://pastebin.com/E08fHr2G >> > >> > But dfu-util -l http://pastebin.com/59fLK4GC does not show any >> userdata >> > partition while it got system partition >> >> Have you tried to use diferent mtdparts while flashing? >> >> one like this for system: >> >> setenv mtdparts >> mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system) >> >> and other like this for usedata: >> >> setenv >> mtdpartsmtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x04040000(factory_system),0x0b6a0000(userdata) >> >> and, if using uboot to start android, this other when all is flasshed: >> >> setenv mtdparts >> mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) >> >> _______________________________________________ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > >
_______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community