Hi Matthias 


Op 2-mrt.-2014, om 19:08 heeft Matthias Apitz het volgende geschreven:

> El día Sunday, March 02, 2014 a las 06:27:44PM +0100, M00R1Z escribió:
> 
>> Hi Matthias , 
> 
> Hello M00R1Z,
> 
>> 
>> i hade the same / a similar problem 
>> and asked on IRC 
>> 
>> 
>> what they(forget who it was) told me / what i did : 
> 
> would be nice to know from whom and which what background came this
> procedure;

It was on Qtmoko's IRC channel on irc.freenode.org #qtmoko
and  my question got answered by "ChristW' (if i can remember correctly)
i also had contact with radek polak who gave  ChristW the info of how to get 
around this 
(i think ChristW told me)
> 
>> 
>> when you're at the menu to give the pin :
>> - pres the aux-button to go to favorites (this actually worked, without the 
>> sim/phone unlocked)
>> - press menu (bottom left corner) and "add"
>> - add Logging (it should be in the list you see)
>> - press "loggin" which should now be in your favorites menu
>>      it asks if Syslogd should be enabled -> i answered "no"
>> - press menu (bottom left corner) and "categories"
>> - Tick off "Modem AT communication"
> 
> I did all the above exactly; only ticked off 'Networking' and 'Service'
i didn't tick these off
AFAIK none of the boxes where ticked off

> which I enabled before to debug something; 'Modem AT communication' was
> not on; should I tick this on?

Tick this ON , that's the fix 
:-)

> 
>> - reboot
> 
> no change of the problem after re-boot :-(
Tick off Modem AT communications as statet above
then reboot 
:-)

> 
> Thanks anyway
> 
>       matthias
> -- 
> Matthias Apitz               |  /"\ ASCII Ribbon Campaign: www.asciiribbon.org
> E-mail: g...@unixarea.de     |  \ / - No HTML/RTF in E-mail
> WWW: http://www.unixarea.de/ |   X  - No proprietary attachments
> phone: +49-170-4527211       |  / \ - Respect for open standards


_______________________________________________
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

Reply via email to