Hi Carl, The Name mctnnbsa51w-142167200021.pppoe-dynamic.high-speed.nb.bellaliant.net you have given does trigger the ISP-YAHOO and ISP-HOTMAIL with the correct condition which is END. Therefore these filters should not be attributing points. Do you have a header example of where these filters have scored with *bellaliant.net ?
David Barker Mail’s Best Friend Email : [email protected] Web : www.mailsbestfriend.com Office : 866.919.2075 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Carl Wagar Sent: Wednesday, July 29, 2015 3:35 PM To: [email protected] Subject: [MBF] ISP-Yahoo and ISP-Hotmail Hi. My filters for outbound senders/users do not seem to be working right and seem to be triggering ISP-Yahoo and ISP-Hotmail. Are these done by IP range? doesn't look that way. My system is triggering those filters even though the user is just connecting from a regular ISP (bell Canada fiber network). 142.167.200.21 Name: mctnnbsa51w-142167200021.pppoe-dynamic.high-speed.nb.bellaliant.net Address: 142.167.200.21 I think it must be some other unique phase in his email. I will likely just add him to the $default$.sender Thanks. Carl J. Carl Wagar EntreNet Communications Inc www.entrenet.com www.thehostingservice.com 24 Swain Ave, Ottawa, ON, K1G 4T1, Canada Email: [email protected], skype: jcwagar Tel: +1 613-737-7327, Fax: +1 613-737-5801 Cel: +1 613-818-8898 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Linda Pagillo Sent: Wednesday, July 29, 2015 2:55 PM To: [email protected] Subject: [MBF] Re: Gauntlet not moving files back into spool Hi John. I apologize for the delay. Is there any way I can have RDP access to your server to check this out? If yes, please email me directly at [email protected] with the credentials. Once I find the answer I will post it publicly to help other folks in the community. Thanks! Linda Pagillo Mail's Best Friend Email: [email protected] Web: www.mailsbestfriend.com Office: 703.988.3606 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Tolmachoff Sent: Wednesday, July 29, 2015 1:09 PM To: [email protected] Subject: [MBF] Re: Gauntlet not moving files back into spool Bueller? Bueller? -----Original Message----- From: "John Tolmachoff" <[email protected]> Sent: Tuesday, July 28, 2015 1:21pm To: [email protected] Subject: [MBF] Gauntlet not moving files back into spool I have just discovered that files (Alligate Gateway which is Imail server) being caught by the Declude Gauntlet test are never moved from the Gauntlet folder back to the spool. DRGOutflow.exe is running and I can see it checking the directory every minute using Process Monitor, but no action is ever taken. My configuration is such: (the command line is continuous, broken here for easy to read) [Process1] CommandLine= ' "C:\Interceptor\Alligate\declude\DRGOutflow.exe" "i=C:\Interceptor\Alligate\Spool\Gauntlet" "o=C:\Interceptor\Alligate\spool\proc" "d=60" ' PauseStart= 100 PauseEnd= 100 UserInterface = No Restart = Yes John T eServices For You ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]> ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]> ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]> ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]> ############################################################# This message is sent to you because you are subscribed to the mailing list <[email protected]>. To unsubscribe, E-mail to: <[email protected]> To switch to the DIGEST mode, E-mail to <[email protected]> To switch to the INDEX mode, E-mail to <[email protected]> Send administrative queries to <[email protected]>
