I replaced the burned-in CRT in my SE/30 with a good one. I'm really happy with the results, but I bottomed out the horizontal size adjustment screw on the analog board without bringing in the side edges of the display more than 1/4-inch or so from the edges. Is there any way of geting it better adjusted? If I leave it like that will it damage the new CRT? (it looks pretty good distortion-wise)
When I got this machine, the internal parts were coated with really fine dirt. I think the fan was running backwards (?), the air was going in the vent and out the floppy slot. It booted up just fine despite the coating of dirt on the inside. This SE/30 apparently once belonged to Coast Forestry, Inc. in British Columbia (it had an ownership sticker on it). __________________________________________________ Do You Yahoo!? Yahoo! Greetings - send holiday greetings for Easter, Passover http://greetings.yahoo.com/ -- Compact Macs is sponsored by <http://lowendmac.com/> and... PowerON Computer Services <http://www.poweron.com> REPLACEMENT PARTS in STOCK Drives, CD-ROMs, RAM, Mac OS SW, Power Supply <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
