Hello everyone.
I recently acquired a MicroMac PerformerPro accelerator for my SE. The manual that came with and the MicroMac site say it can be installed in the PDS slot on my SE, or directly on the CPU on the Plus or Classic.
However, the card I received has no PDS connector - just empty "soldering holes" (sorry, I don't know what they are really called in English) in the place where the PDS connector is supposed to be.
Can I install it on the CPU, too, like on the Plus?
I tried it this morning just to see if it would mechanically fit (power unplugged) and did not manage to fit the provided CPU "killy" clip flush with the mainboard.
I guess that it will work mechanically and I just had no luck the first time...
Thanks for any suggestions,
Niels
-- Compact Macs is sponsored by <http://lowendmac.com/>.
Support Low End Mac <http://lowendmac.com/lists/support.html>
Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
