The picture (http://ajgelado.eresmas.net/shots/pict1814.jpg) shows a
series of ordered horizontal scan lines of regular width, so I think
the analogue board (with its horizontal and vertical sweep circuits)
is working correctly. It must be a logic board problem. I'd try the
standard procedure: to take out of the logic board all the SIMMs (both
RAM and ROM, if it's present), cleaning its edges with a pencil
erarser and reseating them. If you have known-good RAM SIMMs at hand,
you could also try them.

I'd also try to power on the SE/30 with both the hard drive and the
disk drive unconnected from both the logic board and the power. If you
get a bogn and then a flashing disk, you know that the problem is in
one of the drives (or their controllers).

If nothing solve the problem, I'd try to adjust the analogue board's
voltage regulator. If you need further instructions on how to do this,
I can give them to you.

In the worst case, there's a (small) posibility that you have touched
the logic board while being charged with static electricity, and that
have "fried" one or more chips. In that case, the only possible fix
would be to get a replacement motherboard.

Good luck!

Greetings,

Antonio Rodr�guez (Grijan)
<ftp://grijan.cjb.net:21000/>

Geraint Searle - Web ha escrito:

> Picture of screen on boot-up, as requested (PICT1814.JPG)
>
> Many Thanks
>
> Look forwrad to your response.
>
> Geraint Searle


-- 
Compact Macs is sponsored by <http://lowendmac.com/>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------

Reply via email to