From: "josephj" <[EMAIL PROTECTED]>
kebetulan pernah nemuin masalah yg mirip. ini cut & paste dari email yg gue
pernah kirim. maap kalo agak panjang, soalnya dulu harus menjelaskan detil
stepnya sih :)
coba dicek dulu apa masih ada user selain administrator yg masih bisa login.
kalau masih bisa masuk, coba panggil program user administrator dari
start -> administrative tools, terus dblclick di administrator accountnya
untuk mengganti passwordnya. kalau user yg bisa masuk ini punya hak setara
administrator, mustinya bisa.
kalau nggak bisa dengan cara diatas, silakan dicoba cara ini:
(dari http://www.windows2000faq.com/Faq.cfm?FaqID=1359)
--cut--
Q. Changing the Administrator password if you have forgotten it.
A. The instructions below require a second installation of NT on the machine
you have forgotten the password to. I uses the srvany.exe resource kit
utility.
1) Install a second copy of NT onto the machine into a difference dir/drive
(it only has to be a minimal installation) and boot into this installation
2) Copy the srvany.exe from the resource kit into a dir, e.g. c:\temp
3) Start regedt32
4) Move to HKEY_LOCAL_MACHINE and select the root
5) From the Open menu select "Load Hive"
6) Move to %systemroot%\system32\config of the main NT installation, i.e. if
your main installation (the one whose password you are trying to change) is
installed at d:\winnt you would move to d:\winnt\system32\config
7) Select System and click Open
8) You will be asked for a key name, enter Mainreg and click OK
9) Select the "Select" branch and write down the Default value, e.g. 0xn,
e.g. 0x1. This will be used to load the ControlSet00n
10) Move to HKEY_LOCAL_MACHINE\Mainreg\ControlSet00n\Services\Spooler and
take a note of the ImagePath value (it will usually be
%SystemRoot%\system32\spoolss.exe).
11) Change ImagePath to c:\temp\srvany.exe (or where ever you copied the
file to), click OK
12) Move to Parameters and add a Value of type REG_SZ called Application.
Once added double click the new value and set to
%systemroot%\system32\net.exe
13) Add another Value of type REG_SZ called AppParameters. Once added double
click the new value and set to "user Administrator password".
14) Move back to HKEY_LOCAL_MACHINE\Mainreg and select "Unload Hive" from
the open menu. Click Yes to the confirmation
15) You should now reboot and boot off of your original NT installation.
Wait a few minutes and then logon as the administrator with password
password.
You now need to correct the changes made
1) Start Regedt32.exe
2) Move to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Parameters and
delete Application and AppParameters values.
3) Move down to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spoole
and change ImagePath back to its original value
(%SystemRoot%\system32\spoolss.exe)
You may now delete the second installation of NT if you wish and remove it
from the boot menu (edit boot.ini after removing the hidden, read only and
system attributes attrib c:\boot.ini -r -s -h).
All this actually does is change the spooler service to use the SRVANY.EXE
program which runs NET as the service with parameters "user Administrator
password", which is the same as net user Administrator password which is a
way to change the password. Check the resource kit for more information on
SRVANY.
--cut--
program srvany.exe (24kb) bisa didownload dari
http://vbwire.com/advanced/howto/srvany.zip
ada cara lain lagi (lebih singkat tapi lebih tinggi resikonya) adalah pake
boot disk linux khusus untuk masuk ke nt registry. bisa didownload dari
http://www.nttoolbox.com/public/tools/LinNT.zip
(download updatenya juga:
http://www.nttoolbox.com/public/tools/bd990404.zip)
jadi di linnt.zip ada program rawrite.exe. panggil program ini di komputer
lain, dia akan membuatkan bootdisk linux tsb (sediakan floppy kosong). waktu
ditanya pake file bin yg mana, pake yg dari dalam zip update (bd990404.bin).
kalo bootdisknya sudah jadi, masukin di komputer yg nt dan boot dari floppy
itu.
mustinya nanti keluar pertanyaan2 (text-mode) untuk ngejalanin password
recoverynya.
kalo boleh usul sih mungkin dicoba dulu cara yg kedua (yg pake bootdisk
linux), tapi kalo pas dicoba banyak masalah (atau ragu2 atas
pertanyaan2nya), lebih baik pake cara yg pertama (yg pake svrany.exe) aja.
josephj.
> From: "Purnawarman M.T.E.S" <[EMAIL PROTECTED]>
> Saya mempunyai masalah yaitu Kabag IT cabang Medan yang memegang password
> administrator telah resign dan dia tidak memberitahukan password
> administratornya kepada orang lain, sedangkan saya ada di Jakarta.
>
> - Adakah cara lain untuk me-logon ke server tersebut tanpa harus memformat
> atau menginstall ulang Windows NT ?
> - Adakah utility untuk membantu masalah tersebut ?
--
Compu-Mania MailingList, provided by PT Centrin Utama
Unsubscribe: [EMAIL PROTECTED], body: unsubscribe Compu-Mania
Archive: http://www.mail-archive.com/[email protected]/
Info: [EMAIL PROTECTED], body: help
