From: hernawan <[EMAIL PROTECTED]>
halo lagi,
gimana caranya bikin dual boot xp dan 98? di satu HD, satu partisi.
sudah install 98, terus install xp di c:\winxp.
ps restart selalu langsung ke XP.
dicoba start pake startup disk 98, dan sys c:
98nya normal spt semula, namun boot XPnya yg ilang.
ada pencerahan ?
FYI, juga udah coba spt ini, tp belum bisa :
I recommend the use of a Windows 98/Me Startup disk for this procedure. If
you don't have one, you can download the necessary files from http://
www.bootdisk.com You should ensure that DEBUG.EXE is on your Startup
disk. If it isn't, it can be copied from the Windows\Command folder. On a
98/Me Startup disk, created from Add/Remove Programs, its in the EBD.CAB
file on the Startup disk. For a 98 Startup disk created from FAT32EBD.EXE
its on the floppy
Installing Windowsr 98
1) Use a Win98/Me Startup disk (with CD support) to boot your computer.
2) Insert your Win98/Me CD into the CD Rom drive.
3) At the A: prompt type X:\Win98\Setup.exe (for Win98) or
X:\Win9x\Setup.exe (for Win Me) where X: is your CD-ROM drive.
4) Proceed with the install. When prompted for the install location,
you'll see C:\Windows.000. Choose Other directory and change this to the
drive you wish to install 98/ Me to and name the folder Windows (or
something else if you prefer).
5) Complete the Win98/Me install. Allow the computer to boot into
Win98/Me.
Repairing the Windowsr XP Boot Loader
1) Create a Win98/Me Startup Disk
2) Create a Notepad file with the following entries, exactly as shown:
L 100 2 0 1
N C:\BOOTSECT.DOS
R BX
0
R CX
200
W
Q
3) Save the file to the Win98/Me Startup Disk as READ.SCR
4) Boot the computer with the Win98/Me Startup Disk and at the A: prompt
type
DEBUG <READ.SCR
Steps 1 - 4 create the BOOTSECT.DOS file needed to boot Win98/Me. For your
convenience, you can download READ.SCR here. I suggest you use right click
and Save As. You may need to use the ATTRIB C:\BOOTSECT.DOS -S -H -R
command if BOOTSECT.DOS already exists and you get an error when trying to
recreate it.
5) Configure your computer to boot from the CD drive. This is done in the
BIOS, or your computer may offer the option at startup if it detects a
bootable CD. Consult your computer's manual for more information. If your
computer does not support booting from CD-Rom, you should also be able to
boot with a 98/Me Startup disk, and run WINNT.EXE from the I386 folder of
your XP CD.
6) Insert your XP CD and boot from it.
7) You'll see some files being copied, then you'll be presented with a
choice of installing or
repairing an existing installation. Choose Repair.
8) You'll be asked which XP installation you want to log into. Enter
1. There is usually only
one installation.
9) You'll be prompted for the Administrator password. For Home, the
default password is blank, so just hit Enter. For Pro, enter the same
password you did during setup for the Administrator account (this is not
the same as the password for an Admin level account. It must be the
Administrator account password).
10) At the C:\Windows prompt, type FIXBOOT. You'll be prompted to
confirm. Do so.
11) When FIXBOOT is finished, remove the XP CD and type EXIT and the
machine will reboot.
Reconfigure your computer to boot from the hard drive if necessary.
You will now get the XP Boot loader with your choice of operating systems.
tq
--
Compu-Mania MailingList, provided by PT Centrin Online Tbk
Unsubscribe: [EMAIL PROTECTED], body: unsubscribe Compu-Mania
Archive: http://www.mail-archive.com/[EMAIL PROTECTED]/
Info: [EMAIL PROTECTED], body: help
