Hi everyone, just picked up the Harmony 650 today. As far as I could
tell it was basically the 700 without rechargeable batteries. I took it
home, found out about concordance and followed marcw's thread over on
ubuntuforums.
Basically, the results I got were similar to the Harmony 700 information
in the archives. It has the same productid, but some differences in the
lsusb output.
sudo lsusb -v
Bus 003 Device 002: ID 046d:c122 Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc122
bcdDevice 10.72
iManufacturer 1 Harmony Remote 0-0.2.0
iProduct 2 Harmony Remote 0-0.2.0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1 Harmony Remote 0-0.2.0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
** UNRECOGNIZED: 09 21 00 01 00 01 22 21 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
sudo concordance -v -i
Concordance 0.21
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
ERROR: failed to requesting identity
Requesting Identity: Failed with error 1
I haven't recompiled with the debug or cppflags switches, but am more
than willing to help and provide any information I can. Sorry for any
formatting errors, I don't post to lists that often and am not sure if
my client is 100% set up for plain text.
Thanks for this software! I hope I get to be someone who can use it :]
-Tony
------------------------------------------------------------------------------
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
