Hi Scott,
The result is quite encouraging.
Regarding libconcord, the GetIdentity seems to work :
DEBUG (FindRemote): bNumEndpoints 2
DEBUG (check_ep): address 81 attrib 03 max_length 64
DEBUG (check_ep): address 02 attrib 03 max_length 64
DEBUG (GetIdentity): msg_two
DEBUG (debug_print_packet): ff ff 81 00 00 00 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): msg_three
DEBUG (debug_print_packet): ff 00 82 00 00 00 00 00 00 00 00 00 00 00 00 00
DEBUG (ReadFile): msg_read_file
DEBUG (debug_print_packet): ff 01 83 02 01 00 04 00 00 00 da 00 00 00 00 00
DEBUG (ReadFile): msg_ack
DEBUG (debug_print_packet): ff 04 84 02 01 00 01 05 00 00 00 00 00 00 00 00
DEBUG (debug_print_packet): 85 be 66 65 61 74 75 72 65 20 49 6e 66 72 61 72
DEBUG (debug_print_packet): 86 be 20 32 30 31 32 30 39 30 33 31 39 34 32 35
DEBUG (debug_print_packet): 87 be 62 5f 76 65 6e 64 6f 72 5f 69 64 20 30 78
DEBUG (debug_print_packet): 88 a0 5f 74 79 70 65 20 68 69 64 0a 6c 69 6e 6b
DEBUG (ReadFile): data_read=218
DEBUG (reset_sequence): msg_reset_seq
DEBUG (debug_print_packet): ff 07 85 01 01 00 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): feature Infrared
usb_product_id 0xc12b
arch 0x11
serial_number 20120903194257-026202
skin 0x63
hw_ver 01.00
fw_ver 3.4.41
usb_vendor_id 0x046d
fw_type 0x00
link_hw usb
status normal
link_type hid
link_packet_length 64
Requesting identity: 50% DEBUG (GetIdentity): msg_read_config
DEBUG (debug_print_packet): ff 01 ff 01 01 0b 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): ri.config_bytes_used = 4
100% done
DEBUG (reset_sequence): msg_reset_seq
DEBUG (debug_print_packet): ff 07 ff 01 01 04 00 00 00 00 00 00 00 00 00 00
Model: Unknown Harmony Touch
Skin: 99
Firmware Version: 3.4
Firmware Type: 0
Hardware Version: 1.0.0
External Flash: 512 KiB - FF:12 25F040
Architecture: 17
Protocol: 9
Manufacturer: Logitech
Product: Harmony Remote
IRL, ORL, FRL: 64, 64, 0
USB VID: 046D
USB PID: C12B
USB Ver: 1099
Serial Number: 20120903194257-026202
Config Flash Used: 0% (1 of 512 KiB)
Success!
However, issuing a second concordance -i -v always fail :
DEBUG (FindRemote): bNumEndpoints 2
DEBUG (check_ep): address 81 attrib 03 max_length 64
DEBUG (check_ep): address 02 attrib 03 max_length 64
DEBUG (HID_WriteReport): Failed to write to device: -110 (Connection timed
out)
DEBUG (GetIdentity): Failed to write to remote
ERROR: failed to requesting identity
Failed with error 1
I need to disconnect the USB and reconnect it to get it work again.
Regarding mhgui, it now detects my configuration, but issues the following
error messages :
Traceback (most recent call last):
File "/usr/local/bin/mhgui", line 2667, in _OnNext
if self.cur_page.OnNext():
File "/usr/local/bin/mhgui", line 248, in OnNext
BackgroundTask((self.DoLogin, username, password), (self.FinishLogin,))
File "/usr/local/bin/mhgui", line 117, in __init__
self.throbber = ThrobberDialog(throbberTitle)
File "/usr/local/bin/mhgui", line 90, in __init__
self.FindGif("throbber.gif"))
File "/usr/local/bin/mhgui", line 98, in FindGif
appdir = os.path.abspath(os.path.dirname(sys.argv[0]))
IndexError: list index out of range
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/wx/_core.py",
line 14665, in <lambda>
lambda event: event.callable(*event.args, **event.kw) )
File "/usr/local/bin/mhgui", line 132, in ThreadDoneFunction
self.onDoneFunction(bgFuncResult, *self.onDoneFunctionArgs)
File "/usr/local/bin/mhgui", line 256, in FinishLogin
self.parent._SetPage(self.next, True, True)
File "/usr/local/bin/mhgui", line 2721, in _SetPage
(page, data) = self.cur_page.OnActivated(prev_page, data)
File "/usr/local/bin/mhgui", line 343, in OnActivated
BackgroundTask((self.LoadData,), (self.LoadDataUI,), False)
File "/usr/local/bin/mhgui", line 117, in __init__
self.throbber = ThrobberDialog(throbberTitle)
File "/usr/local/bin/mhgui", line 90, in __init__
self.FindGif("throbber.gif"))
File "/usr/local/bin/mhgui", line 98, in FindGif
appdir = os.path.abspath(os.path.dirname(sys.argv[0]))
IndexError: list index out of range
These errors do not seem to have any impact tough.
The Remote is correctly detected by mhgui (but the serial is still 'None') :
Model: Harmony Touch ()
USB HID Model: Logitech Harmony Remote
Serial:
None
None
None
Arch:17 Proto:9 Skin:99
Firmware type:0, version 3.4
HW version 1.0
Flash Manufacturer:255 ID:18 Part:25F040 Size:512K
USB HID Irl:64 Orl:64 Frl:0
USB VID:046d PID:c12b BCD:1099
Config used 4 / total 524288 = 0%
Firmware updates: NOT supported
However, the writing of the config does not work :
Error while writing to the remote
(libconcord function update_configuration error 4)
Traceback (most recent call last):
File "/usr/local/bin/congruity", line 715, in _WorkerFunction
self._WorkerFunctionBody()
File "/usr/local/bin/congruity", line 844, in _WorkerFunctionBody
0
File "/usr/local/lib/python2.7/dist-packages/libconcord.py", line 124, in
__call__
raise LibConcordException(self.func_name, result)
LibConcordException: libconcord function 'update_configuration' failed with
error code 4 ('Error while writing to the remote')
libconcord says :
DEBUG (FindRemote): bNumEndpoints 2
DEBUG (check_ep): address 81 attrib 03 max_length 64
DEBUG (check_ep): address 02 attrib 03 max_length 64
DEBUG (GetIdentity): msg_two
DEBUG (debug_print_packet): ff ff 81 00 00 00 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): msg_three
DEBUG (debug_print_packet): ff 00 82 00 00 00 00 00 00 00 00 00 00 00 00 00
DEBUG (ReadFile): msg_read_file
DEBUG (debug_print_packet): ff 01 83 02 01 00 04 00 00 00 da 00 00 00 00 00
DEBUG (ReadFile): msg_ack
DEBUG (debug_print_packet): ff 04 84 02 01 00 01 05 00 00 00 00 00 00 00 00
DEBUG (debug_print_packet): 85 be 66 65 61 74 75 72 65 20 49 6e 66 72 61 72
DEBUG (debug_print_packet): 86 be 20 32 30 31 32 30 39 30 33 31 39 34 32 35
DEBUG (debug_print_packet): 87 be 62 5f 76 65 6e 64 6f 72 5f 69 64 20 30 78
DEBUG (debug_print_packet): 88 a0 5f 74 79 70 65 20 68 69 64 0a 6c 69 6e 6b
DEBUG (ReadFile): data_read=218
DEBUG (reset_sequence): msg_reset_seq
DEBUG (debug_print_packet): ff 07 85 01 01 00 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): feature Infrared
usb_product_id 0xc12b
arch 0x11
serial_number 20120903194257-026202
skin 0x63
hw_ver 01.00
fw_ver 3.4.41
usb_vendor_id 0x046d
fw_type 0x00
link_hw usb
status normal
link_type hid
link_packet_length 64
DEBUG (GetIdentity): msg_read_config
DEBUG (debug_print_packet): ff 01 ff 01 01 0b 00 00 00 00 00 00 00 00 00 00
DEBUG (GetIdentity): ri.config_bytes_used = 4
DEBUG (reset_sequence): msg_reset_seq
DEBUG (debug_print_packet): ff 07 ff 01 01 04 00 00 00 00 00 00 00 00 00 00
DEBUG (HID_ReadReport): Timeout on interrupt read from device
DEBUG (UpdateConfig): Failed to read from remote
That's it. Thanks already for your work !
Tell me if you want me do something (but I won't have much time this WE).
Regards,
Cedric
2013/12/12 Cédric de Launois <cedric.delaun...@gmail.com>
> I'll try your patch and let you know. Thanks a lot already !
>
>
> 2013/12/12 Scott Talbert <s...@techie.net>
>
>> OK, so I looked more at the serial number thing. As best I can tell, the
>> Touch uses a completely different serial number than any other remote that
>> we support (thanks, Logitech!). I queried the MH API for the serial number
>> in your trace, and sure enough, it comes back as valid. So, it looks like
>> we'll have to support that format, too.
>>
>> So, I have a new patch (v2) attached that should also now handle the
>> serial number. Please try it out and let me know how it goes.
>>
>> Also, I have patched MHGUI (I created a branch 'harmony_touch' in git) to
>> attempt to read the new serial number format. So, in theory you might be
>> able to add your remote with MHGUI. You can try that as well.
>>
>> Scott
>>
>>
>> On Wed, 11 Dec 2013, Scott Talbert wrote:
>>
>> OK, I also pushed a fix to MHGUI to fix that traceback below about the
>>> ProductSetting not being found.
>>>
>>> Now, we're still going to have an issue with MHGUI adding the Touch to
>>> an account, because doing that requires a serial number. I'll have to
>>> think about that some more.
>>>
>>> On Wed, 11 Dec 2013, Cédric de Launois wrote:
>>>
>>> I tried mhgui, It seems that 2nd calls to GetIdentity always fail (even
>>>> outside mhgui).
>>>> Instead of getting the following response :
>>>> DEBUG (debug_print_packet): ff 04 84 02 01 00 01 05 00 00 00 00 00 00
>>>> 00 00
>>>>
>>>> I get this one :
>>>> DEBUG (debug_print_packet): ff 04 ff 01 01 04 00 00 00 00 00 00 00 00
>>>> 00 00
>>>>
>>>> Problem with the sequence number reset ?
>>>>
>>>> The remote hence doesn't appear in the gui.
>>>> Here is the complete DEBUG output :
>>>>
>>>> No handlers could be found for logger "suds.umx.typed"
>>>> Traceback (most recent call last):
>>>> File "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/
>>>> wx/_core.py",
>>>> line 14665, in <lambda>
>>>> lambda event: event.callable(*event.args, **event.kw) )
>>>> File "./mhgui", line 258, in UpdateRemotes
>>>> product = mhMgr.GetProduct(remote.SkinId)
>>>> File "/home/cedric/Downloads/concordance/congruity-17/mhmanager.py",
>>>> line
>>>> 142, in GetProduct
>>>> return self.client.service['ProductsManager'].GetProduct(skinId)
>>>> File "/usr/lib/python2.7/dist-packages/suds/client.py", line 542, in
>>>> __call__
>>>> return client.invoke(args, kwargs)
>>>> File "/usr/lib/python2.7/dist-packages/suds/client.py", line 602, in
>>>> invoke
>>>> result = self.send(soapenv)
>>>> File "/usr/lib/python2.7/dist-packages/suds/client.py", line 647, in
>>>> send
>>>> result = self.succeeded(binding, reply.message)
>>>> File "/usr/lib/python2.7/dist-packages/suds/client.py", line 684, in
>>>> succeeded
>>>> reply, result = binding.get_reply(self.method, reply)
>>>> File "/usr/lib/python2.7/dist-packages/suds/bindings/binding.py",
>>>> line
>>>> 165, in get_reply
>>>> result = unmarshaller.process(nodes[0], resolved)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/typed.py", line 66,
>>>> in
>>>> process
>>>> return Core.process(self, content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 48, in
>>>> process
>>>> return self.append(content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 63, in
>>>> append
>>>> self.append_children(content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 140,
>>>> in
>>>> append_children
>>>> cval = self.append(cont)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 63, in
>>>> append
>>>> self.append_children(content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 140,
>>>> in
>>>> append_children
>>>> cval = self.append(cont)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/core.py", line 61, in
>>>> append
>>>> self.start(content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/encoded.py", line
>>>> 47, in
>>>> start
>>>> Typed.start(self, content)
>>>> File "/usr/lib/python2.7/dist-packages/suds/umx/typed.py", line 80,
>>>> in
>>>> start
>>>> raise TypeNotFound(content.node.qname())
>>>> suds.TypeNotFound: Type not found: 'a:ProductSetting'
>>>> DEBUG (FindRemote): bNumEndpoints 2
>>>> DEBUG (check_ep): address 81 attrib 03 max_length 64
>>>> DEBUG (check_ep): address 02 attrib 03 max_length 64
>>>> DEBUG (init_concord): FindRemote vid:046d pid:c12b ver:1099
>>>> DEBUG (GetIdentity): msg_two
>>>> DEBUG (debug_print_packet): ff ff 81 00 00 00 00 00 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_three
>>>> DEBUG (debug_print_packet): ff 00 82 00 00 00 00 00 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_four
>>>> DEBUG (debug_print_packet): ff 01 83 02 01 00 04 00 00 00 da 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_five
>>>> DEBUG (debug_print_packet): ff 04 84 02 01 00 01 05 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (HID_ReadReport): Timeout on interrupt read from device
>>>> DEBUG (GetIdentity): feature Infrared
>>>> usb_product_id 0xc12b
>>>> arch 0x11
>>>> serial_number 20120903194257-026202
>>>> skin 0x63
>>>> hw_ver 01.00
>>>> fw_ver 3.4.41
>>>> usb_vendor_id 0x046d
>>>> fw_type 0x00
>>>> link_hw usb
>>>> status normal
>>>> link_type hid
>>>> link_packet_length 64
>>>>
>>>> DEBUG (GetIdentity): ri.flash_id:18 ri.architecture:17
>>>> DEBUG (GetIdentity): serial 20120903194257-026202
>>>> DEBUG (GetIdentity): msg_six
>>>> Traceback (most recent call last):
>>>> File "./mhgui", line 316, in OnAddRemote
>>>> serialNumber = ser_1 + ser_2 + ser_3
>>>> TypeError: unsupported operand type(s) for +: 'NoneType' and 'NoneType'
>>>> DEBUG (FindRemote): bNumEndpoints 2
>>>> DEBUG (check_ep): address 81 attrib 03 max_length 64
>>>> DEBUG (check_ep): address 02 attrib 03 max_length 64
>>>> DEBUG (init_concord): FindRemote vid:046d pid:c12b ver:1099
>>>> DEBUG (GetIdentity): msg_two
>>>> DEBUG (debug_print_packet): ff ff 81 00 00 00 00 00 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_three
>>>> DEBUG (debug_print_packet): ff 00 82 00 00 00 00 00 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_four
>>>> DEBUG (debug_print_packet): ff 01 83 02 01 01 04 00 00 00 da 00 00 00
>>>> 00 00
>>>> DEBUG (GetIdentity): msg_five
>>>> DEBUG (debug_print_packet): ff 04 ff 01 01 04 00 00 00 00 00 00 00 00
>>>> 00 00
>>>> DEBUG (HID_ReadReport): Timeout on interrupt read from device
>>>> DEBUG (GetIdentity):
>>>> DEBUG (GetIdentity): ri.flash_id:18 ri.architecture:0
>>>> DEBUG (GetIdentity): serial
>>>> DEBUG (GetIdentity): msg_six
>>>>
>>>>
>>>>
>>>>
>>>> 2013/12/11 Scott Talbert <s...@techie.net>
>>>> Yes - for that we created MHGUI, an alternative front end to the
>>>> myharmony.com web service.
>>>>
>>>> It is packaged as part of the Congruity project:
>>>> http://sourceforge.net/projects/congruity/
>>>>
>>>> It hasn't ever been used before with the Touch or Ultimate, but
>>>> it should probably be close. You will definitely want to check
>>>> out the latest version from git.
>>>>
>>>> Scott
>>>>
>>>> On Wed, 11 Dec 2013, Cédric de Launois wrote:
>>>>
>>>> BTW, there is a big problem with Harmony Touch and
>>>> Harmony Ultimate : the
>>>> website is different and requires silverlight + a
>>>> Logitech plugin.
>>>> There is no way to bypass this check on a Linux
>>>> host, and thus I can't
>>>> download any config file.
>>>>
>>>> I wonder thus if concordance could be of any help
>>>> for these remotes...
>>>>
>>>>
>>>>
>>>> 2013/12/11 Scott Talbert <s...@techie.net>
>>>> Ah, OK. Yeah that works sometimes. It seems
>>>> to work better for
>>>> the newer remotes - some of the older ones
>>>> seem to have problems
>>>> with it. Not sure why.
>>>>
>>>> On Wed, 11 Dec 2013, Cédric de Launois wrote:
>>>>
>>>> hehe, I'm running a Windows 7 in a
>>>> virtualbox, and
>>>> capturing with Wireshark
>>>> on my linux host ;-)
>>>>
>>>>
>>>>
>>>> 2013/12/11 Scott Talbert
>>>> <s...@techie.net>
>>>> Thanks - I'll take a look at this
>>>> later.
>>>>
>>>> BTW, how did you get Wireshark to
>>>> capture
>>>> this? Does the
>>>> Windows version of Wireshark
>>>> support USB
>>>> capturing now?
>>>>
>>>> Scott
>>>>
>>>> On Wed, 11 Dec 2013, Cédric de
>>>> Launois wrote:
>>>>
>>>> Hi again,
>>>>
>>>> Here is the capture.
>>>> You'll probably need to
>>>> extract the
>>>> relevant packets
>>>> using filter :
>>>> 'usb.device_address eq 17'
>>>>
>>>> Regards,
>>>> Cedric
>>>>
>>>>
>>>> 2013/12/11 Scott Talbert
>>>> <s...@techie.net>
>>>> On Wed, 11 Dec 2013,
>>>> Cédric de
>>>> Launois wrote:
>>>>
>>>> Hi there,
>>>>
>>>> Is there any
>>>> plan to support
>>>> the new
>>>> Harmony Touch ?
>>>> I tried to
>>>> connect using
>>>> concordance -i
>>>> but it
>>>> fails.
>>>>
>>>>
>>>> Yes, of course we plan to
>>>> support it,
>>>> but no one had
>>>> (yet) stopped by
>>>> who owns one.
>>>>
>>>> I also have a dump of
>>>> the USB
>>>> traffic between
>>>> the official
>>>> Logitech Harmony
>>>> software and the
>>>> remote :-D
>>>> (captured using
>>>> wireshark).
>>>> I can provide it if
>>>> you want, but
>>>> here is the
>>>> excerpt :
>>>>
>>>> The command data sent
>>>> (6 times ?!)
>>>> seems to be
>>>> (64 bytes)
>>>> :
>>>> ff:00:00:01:01:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:
>>>> 00:00:00:00:00:
>>>>
>>>>
>>>>
>>>>
>>>> 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:
>>>> 00:00:00:00:00:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 00:00:00:00:00:00:00:00:00:00:00:00:00:00
>>>>
>>>> Next a response from
>>>> the Remote :
>>>> ff:ff:81:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:
>>>> 00:00:00:00:00:
>>>>
>>>>
>>>>
>>>>
>>>> 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:
>>>> 00:00:00:00:00:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 00:00:00:00:00:00:00:00:00:00:00:00:00:00
>>>>
>>>>
>>>> Awesome! That's the MH
>>>> protocol. I
>>>> should be able
>>>> to send a patch
>>>> later which should in theory
>>>> add
>>>> support. Also,
>>>> could you send the
>>>> full Wireshark capture? You
>>>> can send it
>>>> directly to
>>>> me, or send me a
>>>> link if you don't want to
>>>> post it on the
>>>> mailing
>>>> list.
>>>>
>>>> Thanks,
>>>> Scott
>>>> ------------------------------------------------------------
>>>> ---------------
>>>>
>>>>
>>>>
>>>> ---
>>>> Rapidly troubleshoot
>>>> problems before
>>>> they affect
>>>> your business. Most
>>>> IT
>>>> organizations don't have a
>>>> clear picture
>>>> of how
>>>> application
>>>> performance
>>>> affects their revenue. With
>>>> AppDynamics,
>>>> you get
>>>> 100% visibility into
>>>> your
>>>> Java,.NET, & PHP
>>>> application. Start your
>>>> 15-day FREE
>>>> TRIAL of
>>>> AppDynamics Pro!
>>>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=
>>>> /4140/ostg.clktrk
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> concordance-devel mailing
>>>> list
>>>>
>>>> concordance-devel@lists.sourceforge.net
>>>>
>>>>
>>>> https://lists.sourceforge.net/lists/listinfo/concordance-
>>>> devel
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ---------------
>>>> ---
>>>> Rapidly troubleshoot problems before they affect your business. Most
>>>> IT
>>>> organizations don't have a clear picture of how application
>>>> performance
>>>> affects their revenue. With AppDynamics, you get 100% visibility into
>>>> your
>>>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of
>>>> AppDynamics Pro!
>>>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=
>>>> /4140/ostg.clktrk
>>>>
>>>> _______________________________________________
>>>> concordance-devel mailing list
>>>> concordance-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>>>>
>>>>
>>>>
>>>>
>>
>> ------------------------------------------------------------------------------
>>
>> Rapidly troubleshoot problems before they affect your business. Most IT
>> organizations don't have a clear picture of how application performance
>> affects their revenue. With AppDynamics, you get 100% visibility into your
>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
>> Pro!
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
>> _______________________________________________
>> concordance-devel mailing list
>> concordance-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>>
>>
>
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
