BTW, it turns out that I have a Harmony 890 in my collection, so I've
started working on this.
On Sat, 7 Sep 2019, AJ Seelund wrote:
Sure!
github repo of screenshots: (sorry, i dont have an active ftp up at the
moment)
https://github.com/notdefault/harmony
[ajs@dovregubben-seelund-local LogitechHarmonyOne]$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 8087:07dc Intel Corp.
Bus 003 Device 006: ID 5986:0295 Acer, Inc
Bus 003 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 004: ID 046d:c112 Logitech, Inc. Harmony 890 Remote
Bus 003 Device 008: ID 04e8:6860 Samsung Electronics Co., Ltd Galaxy (MTP)
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Last Command:
[ajs@dovregubben-seelund-local LogitechHarmonyOne]$ concordance
LatestFirmware.hfw
Concordance 1.3
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Sorry, firmware upgrades are not yet on your remote model yet.
Failed to upload firmware: Model or configuration or operation unsupported
Failed with error 15
--
AJ Seelund
Sr. Architect
Independent Consulting
o: (407) 286.2088
m: (352) 325.1257
a...@seelund.com
-----Original Message-----
From: Scott Talbert <s...@techie.net>
To: AJ S. <a...@seelund.com>, concordance-devel@lists.sourceforge.net
Subject: Re: [concordance-devel] Concordance 2019 - updates?
Date: Sat, 07 Sep 2019 15:07:43 -0400
Can you send me that firmware file that it wants to load or put it online
somewhere?
On September 7, 2019 11:15:25 AM EDT, "AJ S." <a...@seelund.com> wrote:
Hey Scott,
It's the concordance tool, in commandline.
$ sudo concordance UpdateFirmare.hex*?
I was able to successfully load concordance and congruity with
Connectivity.EZup and I have the iframe extension to allow the header
on the webpage to pass through.
When I am logged in to the site, it directs me to download and run
update firmware, which starts congruity but crashes.
I run it via cli, and I get the update firmware note saying it's not
yet supported.
Currently have a harmony 890, with firmware 4.7
I can run the official software in windows, but through a VM. I only
have a Linux based machine. I haven't tried it yet, but I have a win7
install to use.
Thanks - AJ
-------- Original message --------
From: Scott Talbert <s...@techie.net>
Date: 9/7/19 10:56 AM (GMT-05:00)
To: concordance-devel@lists.sourceforge.net, "AJ S." <a...@seelund.com>
Subject: Re: [concordance-devel] Concordance 2019 - updates?
On September 7, 2019 9:18:58 AM EDT, "AJ S." <a...@seelund.com> wrote:
>First, thank you for building this softwareHow can I help contribute
on
>GitHub? I have a harmony 890 and use fedora, but to no avail. I'm
being
>forced to update firmware to 4.9, but failing because "firmware
updates
>are not yet supported" Any way I can help or figure this out to add
>support? I'd be happy to submit a pull request. Thanks - AJ
What specifically is telling you that you have to upgrade the
firmware? Is it the website? Usually you can just ignore most of
what the website says, but if that isn't possible, can you send a
screenshot of that? I've never seen the website require a firmware
update.
In order to add firmware update support, we would probably need a USB
capture of the official software performing one, unfortunately.
Scott
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel