Le mar, 10 oct 2000, Regis Papin a écrit : > > Hello tous, > > JE VAIS CRAQUER LA! > > J'essayes de configurer Diald sans succès! > > Je sais plus a qui me fier la! HOWTO, MAN, WEB..... Je ne retrouve pas mes billes! >En plus j'ai l'impression que c'est a chaque fois un style de config différent! > > Si qq à configuré et utilise Diald (par ppp), ce serait vraiment sympa de bien >vouloir me donner un petit coup de main! Je suis sur que j'ai du passer a coté de qq >chose! > > Merci de votre coopération. > Hello, voici en fichiers joints dialdconf et phone.filter les deux fichiers importants pour diald avec une config qui marche (tu n'auras qu'à changer ton login de connexion à ton fai dans le fichier diald.conf là où c'est indiqué et à vérifier les données de ton modem par rapport à ceux que j'ai mis toujours dans ce fichier. Je ne l'ai pas encore réinstallé mais je peux te certifier qu'il marchait. A ciao, serge. -- T'as le bonjour de LEO! http://leoloden.citeweb.net/
# # diald.conf # # debug 31 # accouting-log /var/log/diald # Select the demand dial rules you want # Bring the link up for anything, timeout in seconds. Use this for # when the dompute has its own phone line #accept any 420 any # Use the filter file that comes with diald. This can be a bit drastic, # so use the filter below include /usr/lib/diald/standard.filter # or use the filter that brings the link up for use on a line shared with # a phone # include /etc/diald/phone.filter # stuff to set up the diald connection device /dev/ttyS0 speed 115200 lock mode ppp # We may get another terminal server, thus use # 'dynamic' and do not tell PPP the IP number of the other end # For use with gated, comment out the 'dynamic' option, and # set remote to be the same as local dynamic local 10.0.0.1 #remote 10.0.0.2 # pppd-options ktune noauth pppd-options ktune noauth user ton-login-de-connexion-à-ton-fai debug usepeerdns # Delay sending packets for 5 seconds after PPP device opens - # this allows routes to be established back to the appropriate dialup server. #up-delay 5 defaultroute modem crtscts connect /etc/diald/connect redial-timeout 20 retry-count 3 fifo /etc/diald/diald.ctl # restrict 9:00:00 17:45:00 1 * * # or-restrict 9:00:00 17:45:00 2 * * # or-restrict 9:00:00 17:45:00 3 * * # or-restrict 9:00:00 17:45:00 4 * * # or-restrict 9:00:00 17:45:00 5 * * # up
# This is a pretty complicated set of filter rules. # (These are the rules I use myself.) # # I've divided the rules up into four sections. # TCP packets, UDP packets, ICMP packets and a general catch all rule # at the end. #------------------------------------------------------------------------------ # Rules for TCP packets. #------------------------------------------------------------------------------ # General comments on the rule set: # # In general we would like to treat only data on a TCP link as signficant # for timeouts. Therefore, we try to ignore packets with no data. # Since the shortest possible set of headers in a TCP/IP packet is 40 bytes. # Any packet with length 40 must have no data riding in it. # We may miss some empty packets this way (optional routing information # and other extras may be present in the IP header), but we should get # most of them. Note that we don't want to filter out packets with # tcp.live clear, since we use them later to speedup disconnects # on some TCP links. # # We also want to make sure WWW packets live even if the TCP socket # is shut down. We do this because WWW doesn't keep connections open # once the data has been transfered, and it would be annoying to have the link # keep bouncing up and down every time you get a document. # # Outside of WWW the most common use of TCP is for long lived connections, # that once they are gone mean we no longer need the network connection. # We don't neccessarily want to wait 10 minutes for the connection # to go down when we don't have any telnet's or rlogin's running, # so we want to speed up the timeout on TCP connections that have # shutdown. We do this by catching packets that do not have the live flag set. # --- start of rule set proper --- # When initiating a connection we only give the link 15 seconds initially. # The idea here is to deal with possibility that the network on the opposite # end of the connection is unreachable. In this case you don't really # want to give the link 10 minutes up time. With the rule below # we only give the link 15 seconds initially. If the network is reachable # then we will normally get a response that actually contains some # data within 15 seconds. If this causes problems because you have a slow # response time at some site you want to regularly access, you can either # increase the timeout or remove this rule. accept tcp 15 tcp.syn ignore tcp tcp.fin # Keep named xfers from holding the link up accept tcp 30 tcp.dest=tcp.domain accept tcp 30 tcp.source=tcp.domain # (Ack! SCO telnet starts by sending empty SYNs and only opens the # connection if it gets a response. Sheesh..) #accept tcp 5 ip.tot_len=40,tcp.syn # keep empty packets from holding the link up (other than empty SYN packets) ignore tcp ip.tot_len=40,tcp.live # make sure http transfers hold the link for 4 minutes, even after they end. # NOTE: Your /etc/services may not define the tcp service www, in which # case you should comment out the following two lines or get a more # up to date /etc/services file. See the FAQ for information on obtaining # a new /etc/services file. accept tcp 60 tcp.dest=tcp.www accept tcp 60 tcp.source=tcp.www # Once the link is no longer live, we try to shut down the connection # quickly. Note that if the link is already down, a state change # will not bring it back up. keepup tcp 5 !tcp.live ignore tcp !tcp.live # an ftp-data or ftp connection can be expected to show reasonably frequent # traffic. accept tcp 60 tcp.dest=tcp.ftp accept tcp 60 tcp.source=tcp.ftp #NOTE: ftp-data is not defined in the /etc/services file provided with # the latest versions of NETKIT, so I've got this commented out here. # If you want to define it add the following line to your /etc/services: # ftp-data 20/tcp # and uncomment the following two rules. accept tcp 120 tcp.dest=tcp.ftp-data accept tcp 120 tcp.source=tcp.ftp-data # If we don't catch it above, give the link 10 minutes up time. accept tcp 30 any # Rules for UDP packets # # We time out domain requests right away, we just want them to bring # the link up, not keep it around for very long. # This is because the network will usually come up on a call # from the resolver library (unless you have all your commonly # used addresses in /etc/hosts, in which case you will discover # other problems.) # Note that you should not make the timeout shorter than the time you # might expect your DNS server to take to respond. Otherwise # when the initial link gets established there might be a delay # greater than this between the initial series of packets before # any packets that keep the link up longer pass over the link. # Don't bring the link up for rwho. ignore udp udp.dest=udp.who ignore udp udp.source=udp.who # Don't bring the link up for RIP. ignore udp udp.dest=udp.route ignore udp udp.source=udp.route # Don't bring the link up for NTP or timed. ignore udp udp.dest=udp.ntp ignore udp udp.source=udp.ntp ignore udp udp.dest=udp.timed ignore udp udp.source=udp.timed # Bring up on domain name requests between two running nameds. accept udp 30 udp.dest=udp.domain,udp.source=udp.domain # Bring up the network whenever we make a domain request from someplace # other than named. #accept udp 30 udp.dest=udp.domain #accept udp 30 udp.source=udp.domain # Do the same for netbios-ns broadcasts # NOTE: your /etc/services file may not define the netbios-ns service # in which case you should comment out the next three lines. ignore udp udp.source=udp.netbios-ns,udp.dest=udp.netbios-ns ignore udp udp.dest=udp.netbios-ns ignore udp udp.source=udp.netbios-ns # keep routed and gated transfers from holding the link up ignore udp tcp.dest=udp.route ignore udp tcp.source=udp.route # Anything else gest 2 minutes. accept udp 120 any # Catch any packets that we didn't catch above and give the connection # 30 seconds of live time. accept any 30 any
