Ce qui est curieux c'est le message d'erreur "read error on input file".
Comme si le problème venait du fichier d'entrée (donc du CD lu) et pas de la
gravure proprement dite !
--
Le Mardi 23 Janvier 2001 07:32, Rosaire AMORE a écrit :
> J'ai abandonné X-CDRoast. Je tente Gcombust. Même tentative (ça fait 15
> jours que je crame des CD sans résultat).
> Tout est bien reconnu (périph, type de CD lu - ici PlayStation, ...)
> Je lance la gravure et j'ai la sortie suivante :
>
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,1,0'
> scsibus: 0 target: 1 lun: 0
> Linux sg driver version: 2.1.39
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'TDK '
> Identifikation : 'CDRW121032 '
> Revision : '1.05'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1190112 = 1162 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 610 MB padsize: 30 KB
> Lout start: 701 MB (69:30/18) = 312618 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: -11079 (97:34/21)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 47231
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Performing OPC...
> /usr/bin/cdrecord: Erreur d'entrée/sortie. read error on input file
> /usr/bin/cdrecord: fifo had 1 puts and 1 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> 100%.
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,1,0'
> scsibus: 0 target: 1 lun: 0
> Linux sg driver version: 2.1.39
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'TDK '
> Identifikation : 'CDRW121032 '
> Revision : '1.05'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1190112 = 1162 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 610 MB padsize: 30 KB
> Lout start: 701 MB (69:30/18) = 312618 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 4
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, high Beta category (A+) (3)
> ATIP start of lead in: -11079 (97:34/21)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 47231
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Performing OPC...
> /usr/bin/cdrecord: Erreur d'entrée/sortie. read error on input file
> /usr/bin/cdrecord: fifo had 1 puts and 1 gets.
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
> 100%.
>
> ?!! ??...!!
> Merci d'une aide eventuelle.
> Y'a bien quelqu'un sur cette liste qui a réussi à graver un CD, non?
>
> --
> Rosaire AMORE
