En réponse à on4hu <[EMAIL PROTECTED]>: > Normalement les cartes TV on un petit "jack" de sortie audio qu'il > faut > ré-entrer > sur la carte son sur une entrée audio.. est ce le cas?
Oui, et ma carte tele marche parfaitement sous win2000 ! > Je suppose que ce n'est pas en numérique et que le son est en > analogique > chez vous? > André > > > ----- Original Message ----- > From: "Merillon Jean-Jacques" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, July 18, 2002 10:48 AM > Subject: Re: [Confirme] Carte TV miro + LM8.2 > > > > En effet j'ai regardé le dmesg et j'ai vu que la carte TV n'etait > pas > corectement renseignée : > > > > bttv: driver version 0.7.83 loaded > > bttv: using 2 buffers with 2080k (4160k total) for capture > > bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 > [KT133/KM133] > > bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super > ACPI] > > bttv: Bt8xx card found (0). > > PCI: Found IRQ 5 for device 00:09.0 > > bttv0: Bt848 (rev 18) at 00:09.0, irq: 5, latency: 32, memory: > 0xdf001000 > > bttv0: using: BT848A( *** UNKNOWN/GENERIC **) [card=0,autodetected] > > > > J'ai donc modifié le fichier modules.conf comme indiqué. Depuis ca > marche > mieux, je reçois bien les 6 chaines. > > > > Par contre je n'ai toujours pas de son :( > > > > voici le nouveau dmseg : > > > > Linux video capture interface: v1.00 > > i2c-core.o: i2c core module version 2.6.2 (20011118) > > i2c-algo-bit.o: i2c bit algorithm module version 2.6.2 (20011118) > > i2c-core.o: driver i2c TV tuner driver registered. > > i2c-core.o: driver i2c msp3400 driver registered. > > bttv: driver version 0.7.83 loaded > > bttv: using 2 buffers with 2080k (4160k total) for capture > > bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 > [KT133/KM133] > > bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super > ACPI] > > bttv: Bt8xx card found (0). > > PCI: Found IRQ 5 for device 00:09.0 > > bttv0: Bt848 (rev 18) at 00:09.0, irq: 5, latency: 32, memory: > 0xdf001000 > > bttv0: using: BT848A(MIRO PCTV) [card=1,insmod option] > > tuner: chip found @ 0xc0 > > bttv0: i2c attach [client=(unset),ok] > > i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. > 0). > > i2c-core.o: adapter bt848 #0 registered as adapter 0. > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: miro: id=9 tuner=3 radio=no stereo=no > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > > tvaudio: TV audio decoder + audio/video mux driver > > tvaudio: known chips: > tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 > (PV951) > > i2c-core.o: driver generic i2c audio driver registered. > > > > > > Ma carte son est une sound blaster de base (PCI) . > > > > Merci de votre aide > > > > > > > Surement un problème de tuner mal configuré. > > > Que te donne dmesg, aux lignes concernant le chipset bttv ? > > > Stef > > > > Sinon, voici ce que je mets pour moi, afin que tout fonctionne : > > > > > > > Dans mon modules.conf, j'ai ajouté : > > > > > alias char-major-81 bttv > > > > > pre-install bttv modprobe -k tuner ; modprobe -k msp3400 > > > > > options i2c verbose=1 scan=1 i2c_debug=0 > > > > > options bttv card=1 > > > > > options tuner debug=0 type=3 > > > > il faut adapter le numéro pour card et type en fonction des modèles, > mais > a > > priori pour une Miro, c'est ce qu'il faut !!! > > > > Stef > > > > > > > ---------------------------------------------------------------------------- > ---- > > > > Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? > > Rendez-vous sur "http://www.mandrakestore.com" > > > > > -- MERILLON Jean-Jacques [EMAIL PROTECTED] Yahoo messenger : jjmerillon ICQ : 82945912
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? Rendez-vous sur "http://www.mandrakestore.com"