Le Mercredi 9 Juillet 2003 00:50, De Leeuw Guy a écrit : drakxtv, c'est pas plutot pour voir la tele sur ton ordi, avec une carte tele justement ??
pour configurer la sortie tele, il faut pas grand chose. Moi, c'est avec une Nvidia, j'ai cherché sur le net, il suffit de reecrire une partie du XF86Config-4 . en gros : 1) vérifie si les drivers installés supportent cette fonctionalité, par ex, moi j'avais le driver open source, il a fallu installé celui de Nvidia (en allant sur le site) 2) Tu rajoute une section dans XF86Config-4 (cf exmple ce dessous de mon XF) 3) Tu démarres sur TVOUT avec par exemple : "startx -- :4.0 -layout tvout" (parce que la section de configuration dans XF86Config s'appelle tvout) voilou Julien PS : mon fichier XF86Config-4 (mais pour une Nvidia GeforceII MX) **************************************** # Ca c'est la partie classique générée par XFDrake Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbCompat" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/usbmouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" HorizSync 30-72 VertRefresh 50-120 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection # A partir d'ici, il y a une configuration classique (Device1, Screen1, etc #...) Section "Device" Identifier "device1" VendorName "nVidia Corporation" BoardName "NVIDIA GeForce2 DDR (generic)" Driver "nvidia" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection #Et ici j'ai rajouté la même strucuture, mais avec -tvout au lieu de 1, et #j'ai changé les paramètres en fonction. Si tu l'appelles bidule, il faudra #marquer device-bidule, screen-bidule, et lancer avec -lyout bidule. # Pour les paramètres ça dépend du pays et de ta carte, mais c'est expliqué #dans le fichier de doc de la carte ou du driver. Section "Device" Identifier "device-tvout" BoardName "NVIDIA GeForce2 MX" Driver "nvidia" Option "DPMS" Option "MetaModes" "800x600" Option "TVOutFormat" "COMPOSITE" Option "TVStandard" "PAL-N" Option "ConnectedMonitor" "TV" EndSection Section "Screen" Identifier "screen-tvout" Device "device-tvout" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "tvout" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen-tvout" EndSection Bon courage > Salut a tous, > > Voila j'ai un dell latitude C800 avec : > MDK 9.1 > Une carte ati rage 128 mobility m4 agp > > Je parviens pas a faire fonctionner la sortie tv. > > J'ai essayé atitvout sans succès. > Dans le panneau mandrake, j'essaye de configurer via drakxtv il me dit > que j'ai pas une carte tv. > j'ai fais une installation des drivers de gatos mais la : startx et plus > rien, obligé de faire un reboot hard. > > qqun a une idée ? > > Merci d'avance > Guy
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? Rendez-vous sur "http://www.mandrakestore.com"