Hi Daniel, On 15 January 2013 17:21, Daniel Wagner <w...@monom.org> wrote: > I can't remember what the exact setup and problem was. But I played a bit > around with AutoConnect=false/true Connect()/Disconnect() and plug/unplug > the ethernet cableo on a IPv4/IPv6 network and everything seems to work as > expected. I did not test it on a IPv6 only network (don't have that setup > here). >
It is possible to simulate IPv6 only network by setting service IPv4 method to OFF and IPv6 method to AUTO (which is the default). In this case IPv4 address is not set to the interface and this is basically the same as if the network does not have IPv4 connectivity. Cheers, Jukka _______________________________________________ connman mailing list connman@connman.net http://lists.connman.net/listinfo/connman