On Fri, 2014-12-19 at 10:12 +0000, Pasi Sjöholm wrote: > 3) Connect and query service from connman and you will see 2001::1 and > 2001::2 plus slaac&dhcpv6 provided nameservers 2001::3 and 2001::4. > > With the patch applied, the nameservers at point 3 will be only the > slaac&dhcpv6 provided 2001::3 and 2001::4.
So what is the problem then of having nameservers 1, 2, 3 and 4 in use at the same time? Is it that: - 1 and 2 don't respond when connecting via DHCPv6/autoconfiguration? - the specification says 1 and 2 must not be used for whatever reason when 3 and 4 are provided by DHCPv6/autoconfiguration? And do we even care about that if 1 and 2 work anyway? If DHCPv6/autoconfiguration does not give any nameservers, the one pushed from oFono are suddenly really good to have... >It is not ofono but connman using the outdated information. The nameserver information is not "outdated" if it comes from the oFono plugin and the proper D-Bus message. If nameservers 1 and 2 are not supposed to be used with DHCPv6/autoconfiguration, then oFono should not be sending this information in the first place. It is not the responsibility of the application (== ConnMan) to interpret which parts of the message to use; all information provided by oFono will be exploited to the full extent possible. Cheers, Patrik _______________________________________________ connman mailing list connman@connman.net https://lists.connman.net/mailman/listinfo/connman