Hello. I'm in the process to test out connman on my laptop to evaluate it's use for freesmartphone.org
For now I'm hanging at the very beginning as it seems not to detect my Intel 5300 wifi card. Marcel suggested that maybe the plugins are not loaded. But step-by-step. I have removed all installed connman stuff from my system, purged the repo and started from scratch. According to HACKING I'm using ./bootstrap-configure I get a failure in the gtk-doc part then when running make: touch sgml-build.stamp p /dbus make[2]: p: Command not found make[2]: [dbus/manager.xml] Error 127 (ignored) echo "<?xml version=\"1.0\"?>" > dbus/manager.xml /bin/sh: dbus/manager.xml: No such file or directory make[2]: *** [dbus/manager.xml] Error 1 make[2]: Leaving directory `/home/stefan/Projekte/smartphones/connman/connman/doc' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/stefan/Projekte/smartphones/connman/connman' make: *** [all] Error 2 Somehow the env is not set correctly. Using this one let's make run through. make MKDIR_P=mkdir builddir=$(pwd)/doc/ Now I'm running wpa_supplicant -u in another shell and test-supplicant shows that wpa_supplicant knows about the card. (Can give you the output if needed) Still starting connmand as described in HACKING gives me the following: [EMAIL PROTECTED]:~/Projekte/smartphones/connman/connman$ sudo ./src/connmand -n -d Connection ":1.64" is not allowed to own the service "org.moblin.connman" due to security policies in the configuration file Not that hard to fix: sudo cp src/connman.conf /etc/dbus-1/system.d/ Now it starts but stops without loading any plugin it seems: [EMAIL PROTECTED]:~/Projekte/smartphones/connman/connman$ sudo ./src/connmand -n -d connmand[21985]: Connection Manager version 0.0 connmand[21985]: storage.c:__connman_storage_init() connmand[21985]: element.c:__connman_element_init() conn 0x1420570 connmand[21985]: element.c:connman_element_create() element 0x14228c0 connmand[21985]: element.c:create_default_properties() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property IPv4.Method connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property IPv4.Address connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property IPv4.Netmask connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property IPv4.Gateway connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property IPv4.Nameserver connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property WiFi.Security connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: element.c:create_default_properties() property WiFi.Passphrase connmand[21985]: element.c:create_property() element 0x14228c0 name root connmand[21985]: device.c:__connman_device_init() connmand[21985]: element.c:connman_driver_register() driver 0x613a40 name device connmand[21985]: element.c:probe_driver() element 0x14228c0 name root connmand[21985]: agent.c:__connman_agent_init() conn 0x1420570 connmand[21985]: manager.c:__connman_manager_init() conn 0x1420570 connmand[21985]: profile.c:__connman_profile_init() conn 0x1420570 connmand[21985]: rtnl.c:__connman_rtnl_init() connmand[21985]: plugin.c:__connman_plugin_init() Running list-devices in tests gives back nothing. Here I'm stucked so far. Basic netlink detection, rtln.c, works. Pulling out and plugin in again my network cable leads to this: connmand[21985]: rtnl.c:rtnl_message() buf 0x7ffff6fb14b0 len 248 connmand[21985]: rtnl.c:rtnl_message() len 248 type 16 flags 0x0000 seq 0 connmand[21985]: rtnl.c:rtnl_message() NEWLINK connmand[21985]: rtnl.c:rtnl_newlink() ifi_index 2 ifi_flags 0x1003 connmand[21985]: rtnl.c:process_newlink() index 2 connmand[21985]: rtnl.c:rtnl_message() buf 0x7ffff6fb14b0 len 248 connmand[21985]: rtnl.c:rtnl_message() len 248 type 16 flags 0x0000 seq 0 connmand[21985]: rtnl.c:rtnl_message() NEWLINK connmand[21985]: rtnl.c:rtnl_newlink() ifi_index 2 ifi_flags 0x11043 connmand[21985]: rtnl.c:process_newlink() index 2 I had the same issue before even after I installed connman into the system. Hints really appreciated. regards Stefan Schmidt _______________________________________________ connman mailing list [email protected] https://lists.moblin.org/mailman/listinfo/connman
