NASA  has done quite a lot of research on the residues left by gloves in
cleanroom situations on critical surfaces .  Below is a summary of findings
in a fairly recent study:  Contamination of Critical Surfaces from NVR Glove
Residues Via Dry Handling and Solvent Cleaning by
Marjorie F. Sovinski , April 2004.


"Summary 
 
Analysis of the results found that for dry handling, the polyethylene
gloves, the nitrile gloves, and the latex gloves performed equally well. Any
of these gloves would be a good first choice, depending on the situation and
application. Nitrile gloves are also a suitable substitute for latex gloves
if latex sensitivity is an issue.
For solvent contact, polyethylene gloves were found to have the least amount
of extractable residue in all solvents, and they also have a minimal
lot-to-lot variation. The nitrile gloves were second only to the
polyethylene gloves in the isopropyl alcohol and ethyl alcohol. They are a
suitable replacement for the latex gloves in any of the solvents. The latex
gloves had higher NVR amounts compared to the nitrile gloves, but they may
be used if required. If the latex gloves are used, any contact with acetone
should be avoided. The polyurethane gloves may be used on a case-by-case
basis, as the set that was tested in isopropyl alcohol was found to have an
NVR level comparable to that found with nitrile gloves. Vinyl gloves should
never be used, and should especially be avoided during solvent cleaning. "

Linda S. Roundhill
Art and Antiquities Conservation, LLC
Woodinville WA USA
www. conservation-arts.com
425-481-0720





Original message:
Message: 12
Date: Tue, 23 Jan 2018 14:10:15 +0000
From: Diehl Johanna <[email protected]>
To: "[email protected]"
        <[email protected]>
Subject: [Consdistlist] nitrile gloves
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"

Dear list-members,
we recently have done some oddy tests of different nitrile gloves. All
results were very similar we do see some changes on all lead and cupper
coupons. That means that the glove materials emit tarnishing pollutants
under accelerated conditions. Does it also mean that in direct contact the
gloves transfer tarnishing residue to object surfaces? Does anybody know
alternatives to nitrile gloves? Has anybody done research on this topic?
Thanks Johanna


Kunsthistorisches Museum Wien

Mag. Johanna Diehl
Restauratorin
Kunstkammer & Schatzkammer




******
Unsubscribe by sending a message to [email protected]
Searchable archives: http://cool.conservation-us.org/byform/mailing-lists/cdl/

Reply via email to