1. Yesterday finally I could make the basic functionality of MNF working in a test 
environment - my DSL is connected to a hardware router, and MNF is behind that. 
2. I wonder if it would be working directly on the DSL with PPPoE, with those ignored 
dependency-problems.
If that works (I doubt that) I will test the IDSs with some portscans.
3. I need it not only in this environment, but in the future at many customers's 
sites, protecting various kind of connections (dsl, leased line w/router, etc). Fully 
functional, running VPN or protecting VPN behind it, DMZ servers, etc.
So I need to make MNF work with your help or choose another software (honestly 
smoothwall GPL 2 beta is very promising)
4. I need to know what form of remote admin notification is possible in email. I tried 
to trigger something, but nothing came.
Should it go through a syslog system always? Right now I am running MNF without it.

-----Original Message-----
From: Florin [mailto:[EMAIL PROTECTED]] 
Sent: Monday, November 18, 2002 9:16 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker-firewall] Troubles with mnf install - both 8.2 and cooker


Radv�nszki G�bor <[EMAIL PROTECTED]> writes:

> When I ran --nodep the installation went on but the following error 
> came:
> 
> "
> /var/tmp/rpm-tmp.86993: fg: no job control
> error: execution of %pre scriptlet from snort-1.9.0-2mdk failed, exit 
> status 1 "

What internet access type do you have ?

The snort error is not really a prb ...

> 
> ???
> > -----Original Message-----
> > From: Radv�nszki G�bor
> > Sent: Monday, November 18, 2002 7:48 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [Cooker-firewall] Troubles with mnf install - 
> > both 8.2 and cooker
> > 
> > 
> > Finally, I used the linux.redbox.cz and I got everything. After 
> > downloading Florin's rpms, I deleted two (frontend-fr and snf-fr). 
> > The following comes up when I try to run 'rpm -Uvh *.rpm'
> > 
> >  rp-pppoe is needed by snf-en-8.2-11mdk
> >         pptp-adsl is needed by snf-en-8.2-11mdk
> >         pptp-client is needed by snf-en-8.2-11mdk
> >         /usr/bin/whiptail is needed by snf-en-8.2-12mdk
> >         rp-pppoe is needed by snf-en-8.2-12mdk
> >         pptp-adsl is needed by snf-en-8.2-12mdk
> >         pptp-client is needed by snf-en-8.2-12mdk
> >         speedtouch is needed by speedtouch_mgmt-0.1-2mdk
> > 
> > What should I do?
> 

Reply via email to