[EMAIL PROTECTED] @mail.recif.fr wrote:
> hello,
> me or bootnet?
> I got:
> "in loadDeviceDriver, ks=0, typname = SCSI
> pci probing for SCSI devices
> pci probe found 2 SCSI devices
> found driver for NCR 53C8xx PCI
> running: /bin/insmode /bin/insmod /modules/nc53c8xx.o
> insmod failed!
> multiple ncr53cx device found"
>
> Before this, all was OK (netcard, ...)
> the configuration: Proliant 3000, one netflex, 300Mo memory, 9Go
disk...
>
> (No smart array!, only the on board controler)
>
> M. Prillot
Sorry, I omitted /proc/bus/pci/devices in my last mail, so here is all
you
need...
in '/proc/pci'
"PCI devices found
Bus 0, device 0, function 0:
Hosts bridge: Unknown vendor Unknown device (rev 3).
Vendor id=1166. Device id=5
Medium devsel. Master capable. Latency=64.
Bus 0, device 6, function 0:
VGA compatible controller: Cirrus Logic GD 5430 (rev 34).
Medium devsel.
Prefetchable 32 bit memory at 0xc5000000 [0xc5000008].
Bus 0, device 15, function 0:
Eisa bridge: Compaq Unknown device (rev 7).
Vendor id=E11. Device id=1
Medium devsel. Master capable. No burst.
Bus 0, device 17, function 0:
Hosts bridge: Unknown vendor Unknown device (rev 3).
Vendor id=1166. Device id=5
Medium devsel. Master capable. Latency=64.
Bus 1, device 4, function 0:
SCSI storage controller: NCR 53c875 (rev 20).
Medium devsel. IRQ 9. Master capable. Latency=255 Min Gnt=17
Max
Lat=64
I/O at 0x5000 [0x5001]
Non-prefetchable 32 bit memory at 0xc6ffdf00 [0xc6ffdf00].
Non-prefetchable 32 bit memory at 0xc6fff000 [0xc6fff000].
Bus 1, device 4, function 1:
SCSI storage controller: NCR 53c875 (rev 20).
Medium devsel. IRQ 10. Master capable. Latency=255 Min
Gnt=17
Max
Lat=64
I/O at 0x5400 [0x5401]
Non-prefetchable 32 bit memory at 0xc6ffde00 [0xc6ffde00].
Non-prefetchable 32 bit memory at 0xc6ffe000 [0xc6ffe000].
Bus 1, device 8, functio 0:
Network controller: Compaq Netelligent 10/100 (rev 16)
Medium devsel. Fast back-to-back capable. IRQ 5. Master
capable.
Latency=64.
I/O at 0x5800 [0x5801]
Non-prefetchable 32 bit memory at 0xc6ffddf0 [0xc6ffddf0].
"
IN '/pci/bus/pci/devices'
0000 11660005 0 00000000 00000000 00000000 00000000
00000000 00000000 00000000
0030 101300a0 0 c5000008 00000000 00000000 00000000
00000000 00000000 00000000
0078 0e110001 0 00000000 00000000 00000000 00000000
00000000 00000000 00000000
0088 11660005 0 00000000 00000000 00000000 00000000
00000000 00000000 00000000
0120 1000000f 9 00005001 c6ffcf00 c6fff000 00000000
00000000 00000000 00000000
0121 1000000f a 00005401 c6ffce00 c6ffe000 00000000
00000000 00000000 00000000
0140 10b80005 5 00005801 c6ffd000 00000000 00000000
00000000 00000000 00000000
Houcth, that's all for /proc/bus/pci/devices. I look at /proc/scsi/scsi
and
I see:
"Attached devices: none"
There is a 9Go attached, while on pr-boot i can whith 'F10' execute the
copy
of smartstart (It's smartstart little partition after use smartstart for
configure the proliant).
M. Prillot