http://qa.mandrakesoft.com/show_bug.cgi?id=3326
------- Additional Comments From [EMAIL PROTECTED] 2003-03-16 20:16 ------- Have you tried using the prism2_cs driver instead? Just a thought. It's included with Mandrake kernels but you need toys from the prism2-utils package from cooker contribs to set it up. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Am running 9.1RC2 on a Compaq M700 with a Compaq WL110 (Orinoco) wireless card. On inserting the card, I run the following script to setup my encryption parameters (the essid, and encryption keys have been edited out for security purposes): /sbin/iwconfig eth1 essid companyid /sbin/iwconfig eth1 mode Managed /sbin/iwconfig eth1 key xxxx-xxxx-xx [1] /sbin/iwconfig eth1 key xxxx-xxxx-xx [2] /sbin/iwconfig eth1 key xxxx-xxxx-xx [3] /sbin/iwconfig eth1 key xxxx-xxxx-xx [4] /sbin/iwconfig eth1 key [1] At this point I can see the wireless access-point with iwconfig. Then I invoke "dhclient eth1" and get the following output: Internet Software Consortium DHCP Client V3.0pl2 Copyright 1995-2001 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Listening on LPF/eth1/00:02:a5:6e:36:8a Sending on LPF/eth1/00:02:a5:6e:36:8a Sending on Socket/fallback DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3 No DHCPOFFERS received. No working leases in persistent database - sleeping. I am unable to hook up to the company network. If I repeat the above on the same hardware booting MDK 9.0, (using "dhcpcd eth1" instead of "dhclient eth1"), everything works! In my home wireless environment, where I have no encryption turned on, I do not run the script above, but simply type "dhclient eth1" on MDK 9.1RC2 and I am up on the network.