http://qa.mandrakesoft.com/show_bug.cgi?id=3388
Product: kernel-2.4.21.0.13mdk Component: libsasl2-plug-ntlm Summary: Won't boot on Latitude XPi because of HD Version: 1-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] 2.4.19-16mdk boots fine on this machine, but this new kernel won't, even with acpi=off noapic. It fails to use the hard-drive: CDM643: simplex device. DMA forced hda: IBM-DCRA-22160, ATA DISK drive ... partition check: hda: lost interrupt hda: dma_intr: bad DMA status (dma_stat=1) hda: dma_intr: status=0x50 {DriveReady, SeekComplete} and so on every time it tries to access the hard drive. I tried to boot with ide0=nodma ide1=nodma, but it does not change anything. # hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: IBM-DCRA-22160 Serial Number: A30A31G3820 Firmware Revision: A81AD0 Standards: Used: ATA-3 X3T10 2008D revision 1 Supported: 3 2 1 Configuration: Logical max current cylinders 4200 4200 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 4233600 LBA user addressable sectors: 4233600 device size with M = 1024*1024: 2067 MBytes device size with M = 1000*1000: 2167 MBytes (2 GB) Capabilities: LBA, IORDY(can be disabled) Buffer size: 96.0kB bytes avail on r/w long: 4 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 16 Current = 16 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: Power Management feature set Security Mode feature set SMART feature set Of course, that means that the install floppy does not boot either. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.