http://qa.mandrakesoft.com/show_bug.cgi?id=3492
------- Additional Comments From [EMAIL PROTECTED] 2003-03-23 01:27 ------- I decided to re-install MDK-9.0 on this machine. The installation ran to completion successfully. One note however is that the IDE connector which became associated with devices hda & hdb under 9.1 RC2 is associated with devices hde & hdf under Mdk 9.0; in fact 9.1 RC2 gets it right and Mdk 9.0 gets it wrong! What can I do to help? ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hardware is Athlon-2100, 512 Meg ram, Gigabyte GA-7VAXP mobo. There are 2 IDE drives attached to the primary IDE controller, 2 CD drives attached to the secondary IDE. There is an Adaptec 2100S RAID device set up as RAID-5 and on /dev/sda. The installation hangs during install of "package makedev"; this is observed by using the "details" button. I tried rebooting off the RC2 install CD and using "rescue" mode, but it was unable to mount any partitions at all other than "/boot", which seems to be empty. Mandrake version 9.0 has run on this machine although with partitions set up differently. The partitions are as follows: hda1 /boot 25 MByte ext2 hda5 / 350 MByte JFS hda6 /proj1 28 Gbyte JFS hdb1 SWAP 1 Gbyte hdb5 /var 2.9 GByte JFS hdb6 /proj2 24 GByte JFS sda1 /usr 4.8 GByte JFS sda5 /opt 1.9 GByte JFS sda6 /home 9.5 GByte JFS sda7 /proj3 9.2 GByte JFS