http://qa.mandrakesoft.com/show_bug.cgi?id=3421
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |UNCONFIRMED
------- Additional Comments From [EMAIL PROTECTED] 2003-03-24 23:50 -------
Negative. The script does it's probing, and spits back information, but
does not send the serveraid into it's death spin. Any other suggestions?
This certainly seems like a show stopper to me.
information returned:
-----------------------------------------------------------------------
[EMAIL PROTECTED] root]# perl -e 'use lib qw(/usr/lib/libDrakX); use
detect_devices; use Data::Dumper; print Dumper([
detect_devices::getSCSI() ]);'
Probing (2, 00, 00, 00)
Probing (2, 00, 01, 00)
Probing (2, 00, 02, 00)
Probing (2, 00, 15, 00)
Probing (2, 01, 08, 00)
Probing (2, 01, 09, 00)
Processing "sda"
Processing "sdb"
Processing "sdc"
Fixing old hp scanners detection (hook called for "sg3"
Fixing old hp scanners detection (hook called for "sg4"
Fixing old hp scanners detection (hook called for "sg5"
Adding devfsd device names
Adding cdrom information
Probing complete
$VAR1 = [
{
'info' => 'IBM SERVERAID',
'bus' => 'SCSI',
'raw_type' => 'Direct-Access ANSI SCSI revision: 02',
'channel' => '00',
'device' => 'sda',
'host' => 2,
'lun' => '00',
'devfs_device' => 'scsi/host2/bus0/target0/lun0/disc',
'devfs_prefix' => 'scsi/host2/bus0/target0/lun0',
'media_type' => 'hd',
'id' => '00'
},
{
'info' => 'IBM SERVERAID',
'bus' => 'SCSI',
'raw_type' => 'Direct-Access ANSI SCSI revision: 02',
'channel' => '00',
'device' => 'sdb',
'host' => 2,
'lun' => '00',
'devfs_device' => 'scsi/host2/bus0/target1/lun0/disc',
'devfs_prefix' => 'scsi/host2/bus0/target1/lun0',
'media_type' => 'hd',
'id' => '01'
},
{
'info' => 'IBM SERVERAID',
'bus' => 'SCSI',
'raw_type' => 'Direct-Access ANSI SCSI revision: 02',
'channel' => '00',
'device' => 'sdc',
'host' => 2,
'lun' => '00',
'devfs_device' => 'scsi/host2/bus0/target2/lun0/disc',
'devfs_prefix' => 'scsi/host2/bus0/target2/lun0',
'media_type' => 'hd',
'id' => '02'
},
{
'info' => 'IBM SERVERAID',
'bus' => 'SCSI',
'raw_type' => 'Processor ANSI SCSI revision: 02',
'channel' => '00',
'device' => 'sg3',
'host' => 2,
'lun' => '00',
'devfs_prefix' => 'scsi/host2/bus0/target15/lun0',
'media_type' => 'scanner',
'id' => 15
},
{
'info' => 'IBM YGLv3 S2',
'bus' => 'SCSI',
'raw_type' => 'Processor ANSI SCSI revision: 02',
'channel' => '01',
'device' => 'sg4',
'host' => 2,
'lun' => '00',
'devfs_prefix' => 'scsi/host2/bus1/target8/lun0',
'media_type' => 'scanner',
'id' => '08'
},
{
'info' => 'IBM YGHv3 S2',
'bus' => 'SCSI',
'raw_type' => 'Processor ANSI SCSI revision: 02',
'channel' => '01',
'device' => 'sg5',
'host' => 2,
'lun' => '00',
'devfs_prefix' => 'scsi/host2/bus1/target9/lun0',
'media_type' => 'scanner',
'id' => '09'
}
];
[EMAIL PROTECTED] root]#
-----------------------------------------------------
"If you hate your parents, the man, or the establishment, don't show
them up by getting wasted and wrapping your car around a tree. If you
really want to rebel against your parents: outearn them, outlive them,
and know more than they do."
-Henry Rollins
-----------------------------------------------------
And then like, tvignaud, was all like:
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
------- Reminder: -------
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Using the harddrake2 tool in 9.1 RC2, during the hardware scan process,
eventually the arrays on a IBM serveraid 4M controller are set to defunct. All
Drives are set to defunct. and this happens every time I run harddrake2.
Hardware: IBM Netfinity 4500R (x340) IBM Serveraid 4M controller, all
bios/firmware levels current to UpdateExpress 2.02 (January 2003)
