note also:
# ls /dev/zip -all
lrwxrwxrwx 1 root root 4 May 24 03:30 /dev/zip -> sda4
# mount /dev/sda4 /mnt/zip
mount: /dev/sda4 is not a valid block device
# mount /dev/sda /mnt/zip
mount: /dev/sda is not a valid block device
Chmouel Boudjnah wrote:
> Tim & Val Litwiller <[EMAIL PROTECTED]> writes:
>
> > here is output from cat /proc/scsi/scsi
> >
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > Vendor: IOMEGA Model: ZIP 100 Rev: 02.U
> > Type: Direct-Access ANSI SCSI revision: 02
>
> so you have your USB zip available from /dev/sda use it like a disk.
>
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IDE-CD Model: R/RW
> > 4x4x24 Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02
> >
> > note: this is after I did the modprobe ide-scsi
> >
> >
> >
> > Chmouel Boudjnah wrote:
> >
> > > Tim & Val Litwiller <[EMAIL PROTECTED]> writes:
> > >
> > > > What do I need to check to get my usb zip drive working and my cd-writer
> > > > to be working at startup.
> > >
> > > humm what say /proc/scsi/scsi
> > >
> > > --
> > > MandrakeSoft Inc http://www.mandrakesoft.com
> > > In travel. --Chmouel
> >
>
> --
> MandrakeSoft Inc http://www.mandrakesoft.com
> In travel. --Chmouel