http://qa.mandrakesoft.com/show_bug.cgi?id=4987
[EMAIL PROTECTED] changed: What |Removed |Added ---------------------------------------------------------------------------- Status|UNCONFIRMED |ASSIGNED Component|scannerdrake |program Ever Confirmed| |1 Product|drakxtools |sane-backends Version|9.2-4mdk |1.0.12-1mdk ------- Additional Comments From [EMAIL PROTECTED] 2003-29-08 16:23 ------- What does "scanimage -L" tell you and what "sane-find-scanner"? Does it show both your scanner and the HP 4200 or only the HP 4200? Can you post the output? I have a system with an HP PSC 950 and an Epson Perfection 1260 Photo and I get the following: --------------------------------------------------------------------------- [EMAIL PROTECTED] g]# scanimage -L device `hpoj:mlc:usb:PSC_900_Series' is a Hewlett-Packard PSC 900 Series multi-function peripheral device `plustek:/dev/usb/scanner0' is a Epson Perfection 1260/Photo USB flatbed scanner device `hp4200:/dev/usb/scanner0' is a Hewlett-Packard HP-4200 flatbed scanner [EMAIL PROTECTED] g]# --------------------------------------------------------------------------- So my Epson Perfection 1260 Photo is detected both as Epson and as HP (/dev/usb/scanner0). If I unload the scanner.o kernel module with rmmod scanner.o my scanners are correctly detected (The HP 4200 disappears, the other two stay). So the problem only happens with access to the scanners via the kernel module but not with user-mode USB access via libusb (the way SANE takes when there is no scanner.o module loaded. I will report this to the SANE developers mailing list, it is probably a bug in the "hp4200" driver that it recognizes also scanners which use other drivers. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: Mandrake 9.2 RC1 incorrectly identifies my "Epson Perfection 1650" as being an "Hewlett-Packard HP-4200". In Mandrake 9.1, Scannerdrake had properly identified my scanner.