http://qa.mandrakesoft.com/show_bug.cgi?id=4618
------- Additional Comments From [EMAIL PROTECTED] 2003-13-09 00:32 ------- For the DVD-Rom drive I added hdd=ide-scsi to the boot parameters in lilo.conf. This seems to make K3b happy as the DVD Rom drive shows up under Reader. K3B also seems to be more stable with this change (does not hang the PC). -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Operating Systems: Mandrake 9.1, Mandrake 9.2b1, Mandrake 9.2b2 Program: k3bsetup Wizard Tab: Setup of CD (step 3 of 6) DVD: Pioneer DVD-ROM DVD-103S CD-Writer: HP CD-Writer+ 7500 Problem: DVD drive is identified as a Writer (see below for details) Note: k3bsetup (k3b-0.8.1-3mdk) correctly identifies the DVD drive as a Reader and CD-Writer drive as Writer for the three operating systems listed above. For k3bsetup (k3b-0.9-3mdk) Details: No entries under the Reader. Entries under Writer: Pioneer DVD-ROM DVD-103R System device name: /dev/ide/host0/bus1/target1/lun0/cd Interface type: ATAPI Vendor: PIONEER Description: DVD-ROM DVD-103R Version: 1.14 Max read speed: 0 Max write speed: 0 Cdrdao driver: auto CD-Text capable: auto Supports Burnfree - no CD/RW drive - no Supports DAO writing - yes Write modes: SAO TAO HP CD-Writer+ 7500 System device name: /dev/scsi/host0/bus0/target0/lun0/cd (0,0,0) Interface type: Generic SCSI Vendor: HP Description: CD-Writer+ 7500 Version: 1.0a Max read speed: 24 Max write speed: 2 Cdrdao driver: auto CD-Text capable: auto Supports Burnfree - no CD/RW drive - yes Supports DAO writing - yes Write modes: SAO PACKET TAO