http://qa.mandrakesoft.com/show_bug.cgi?id=5678
------- Additional Comments From [EMAIL PROTECTED] 2003-15-09 16:58 ------- Created an attachment (id=835) --> (http://qa.mandrakesoft.com/attachment.cgi?id=835&action=view) commands that won't and will work This command, generated at rc2 install, will gpf at power down. I had removed the splash=silent command in order to view boot messages: root=/dev/hdg12 devfs=mount acpi=ht hdc=ide-scsi resume=/dev/hda5 vga=788 This command will power down cleanly: devfs=mount hdc=ide-scsi resume=/dev/hda5 vga=788 root=/dev/hdg12 Kernel in both cases is 2.4.22-9mdk. kernel-tmb-2.4.22.7.tmb on yesterday's cooker behaves the same. In the past, I have fixed such a power down problem with this motherboard by recompiling a kernel with CONFIG_APM_REAL_MODE_POWER_OFF set to YES. There have been some kernels which worked without problem and some for which 'noapic' would provide a clean power off. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: For 9.2rc2, the installer puts acpi=ht on the boot command line for the Grub bootloader. This is a desktop, IWill XP333-R motherboard, latest BIOS, ALi Magik 1 (ALi M1647 Northbridge, ALi M1535D+ Southbridge) chipset, socket A, Athlon XP processor. Booting with the acpi=ht parameter will cause a general protection fault:fdf8, Bad EIP value at power down. Removing this command allows the computer to shut down cleanly. The behavior is the same with kernel-2.4.22.9mdk and updated cooker.
