http://qa.mandrakesoft.com/show_bug.cgi?id=5673
------- Additional Comments From [EMAIL PROTECTED] 2003-11-12 18:18 ------- Have you tried booting with 'acpi=off'? This fixes problems for me on the machines I have seen with this problem. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Mainboard: ASRock K7S8X, SIS 746FX chipset, Bios 1.90 Sept, 15, 2003 I tried to boot up from 9.2rc2 CD 1. It detected my IDE-chipset as SIS 5513: SIS 962/963 MuIOL UDMA/133 Then it got problems while detecting my HDDs: hda: attached ide-disk driver hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: host protected ares=J1 hda: lost interrupt hda: xxx sectors etc. (harddisk properly detected) from the first "lost interrupt" to the detection of my first harddisk two minutes elapsed. As it tried to detect my hdc and started again with "hdc: lost interrupt" I stopped the installation. Maybe a workaround for this could be to use the kernel - parameter "noapic", but this would be a *workaround* only. On my current 9.1 installation with kernel 2.4.21 I also get APIC-errors in /var/log/messages even when starting with the "noapic" - option :-( Any help would be appreciated! Thank you!
