Hi,
I've 1 question..and a possible bug report....
First off, I want to do a hd install fro a reiserfs partition... how can I add
the reiserfs.o module to the hd.img boot floppy ?
Secondly, to get around this I'm copying the cooker files to a vfat partition
and trying to install from there... I get as far as partitioning the
drive...sdb, and after partition I get a mount failure, and sdb1 is stuck
mounted...and I can't get any further... the machine is a dell workstation
410 with Adaptec aic29..
here is a copy of the output from bug...
Thanks,
Ruairi
____________________________________________________________________
Get free email and a permanent address at http://www.amexmail.com/?A=1
********************************************************************************
* lspci
********************************************************************************
Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge (unknown ignore)
Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge (unknown ignore)
Intel Corporation|82371AB PIIX4 ISA (unknown unknown)
Intel Corporation|82371AB PIIX4 IDE (STORAGE_IDE unknown)
Intel Corporation|82371AB PIIX4 USB (SERIAL_USB usb-uhci)
Intel Corporation|82371AB PIIX4 ACPI (unknown unknown)
Texas Instruments|TSB12LV23 OHCI Compliant IEEE-1394 Controller (SERIAL_FIREWIRE
unknown)
3Com Corporation|3c905B 100BaseTX [Cyclone] (NETWORK_ETHERNET 3c59x)
DEC|DECchip 21152 (unknown tulip)
nVidia Corporation|Riva TNT2 (DISPLAY_VGA Card:RIVA TNT2)
Adaptec|AHA-2940U2/W / 7890 (STORAGE_SCSI aic7xxx)
Adaptec|AIC-7880U (STORAGE_SCSI aic7xxx)
********************************************************************************
* pci_devices
********************************************************************************
0000 80867190 0 ec000008 00000000 00000000
00000000 00000000 00000000 00000000
0008 80867191 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000
0038 80867110 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000
0039 80867111 0 00000000 00000000 00000000
00000000 0000ffa1 00000000 00000000
003a 80867112 e 00000000 00000000 00000000
00000000 0000ece1 00000000 00000000
003b 80867113 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000
0070 104c8019 b fe004000 fe000000 00000000
00000000 00000000 00000000 00000000
0088 10b79055 e 0000ec01 fe004800 00000000
00000000 00000000 00000000 f9000000
0098 10110024 0 00000000 00000000 00000000
00000000 00000000 00000000 00000000
0100 10de0028 a fc000000 f4000008 00000000
00000000 00000000 00000000 80000000
0250 9005001f f 0000fc01 fafff004 00000000
00000000 00000000 00000000 fb000000
0270 90048078 f 0000f801 faffe000 00000000
00000000 00000000 00000000 fb000000
********************************************************************************
* fdisk
********************************************************************************
Disk /dev/sda: 255 heads, 63 sectors, 554 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 554 4449973+ b Win95 FAT32
Disk /dev/sdb: 255 heads, 63 sectors, 1106 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 31 248976 82 Linux swap
/dev/sdb2 32 1106 8634937+ 5 Extended
/dev/sdb5 32 69 305203+ 83 Linux
/dev/sdb6 70 451 3068383+ 83 Linux
/dev/sdb7 452 1106 5261256 83 Linux
********************************************************************************
* scsi
********************************************************************************
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: SEAGATE Model: ST39102LW Rev: 0004
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
********************************************************************************
* lsmod
********************************************************************************
msdos 5468 0 (unused)
reiserfs 128072 0
parport_pc 7504 0
parport 7340 0 [parport_pc]
ide-cd 24000 0
cdrom 30524 0 [ide-cd]
serial 18676 0
usb-uhci 21324 0 (unused)
usbcore 43368 1 [usb-uhci]
af_packet 6180 0 (unused)
sd_mod 16968 0
aic7xxx 128868 0
scsi_mod 39812 2 [sd_mod aic7xxx]
vfat 9372 1
fat 29760 1 [msdos vfat]
********************************************************************************
* cmdline
********************************************************************************
ramdisk_size=32000 initrd=hd.rdz hd text BOOT_IMAGE=vmlinuz
********************************************************************************
* pcmcia: stab
********************************************************************************
********************************************************************************
* usb
********************************************************************************
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ece0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0663 ProdID=9804 Rev= 1.03
S: Manufacturer=USB Game Device
S: Product=USB Game Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl= 8ms
********************************************************************************
* partitions
********************************************************************************
major minor #blocks name
8 0 4455211 sda
8 1 4449973 sda1
8 16 8891620 sdb
8 17 248976 sdb1
8 18 1 sdb2
8 21 305203 sdb5
8 22 3068383 sdb6
8 23 5261256 sdb7
********************************************************************************
* cpuinfo
********************************************************************************
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 398.784
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr
bogomips : 796.26
********************************************************************************
* syslog
********************************************************************************
got socket
bound socket
<4>Linux version 2.2.17-BOOT2 ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030
(prerelease)) #1 Thu Sep 7 18:44:26 CEST 2000
<4>Detected 398784 kHz processor.
<4>ide_setup: hd -- BAD OPTION
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 796.26 BogoMIPS
<4>Memory: 516412k/524224k available (844k kernel code, 412k reserved, 5532k data,
120k init, 0k bigmem)
<4>Dentry hash table entries: 65536 (order 7, 512k)
<4>Buffer cache hash table entries: 524288 (order 9, 2048k)
<4>Page cache hash table entries: 131072 (order 7, 512k)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel Pentium II (Deschutes) stepping 02
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>PCI: PCI BIOS revision 2.10 entry at 0xfcf2e
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>TCP: Hash tables configured (ehash 524288 bhash 65536)
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<4>RAM disk driver initialized: 16 RAM disks of 32000K size
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev 39
<4>PIIX4: device not capable of full native PCI mode
<4>PIIX4: device disabled (BIOS)
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
<6>raid5: measuring checksumming speed
<6>raid5: MMX detected, trying high-speed MMX checksum routines
<4> pII_mmx : 901.446 MB/sec
<4> p5_mmx : 918.210 MB/sec
<4> 8regs : 692.658 MB/sec
<4> 32regs : 390.144 MB/sec
<4>using fastest function: p5_mmx (918.210 MB/sec)
<6>COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]>
<4>md.c: sizeof(mdp_super_t) = 4096
<4>Partition check:
<5>RAMDISK: Compressed image found at block 0
<6>autodetecting RAID arrays
<4>autorun ...
<4>... autorun DONE.
<4>VFS: Mounted root (ext2 filesystem).
<6>(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 2/10/0
<6>(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
<6>(scsi0) Downloading sequencer code... 392 instructions downloaded
<6>(scsi1) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 2/14/0
<6>(scsi1) Wide Channel, SCSI ID=7, 16/255 SCBs
<6>(scsi1) Warning - detected auto-termination
<6>(scsi1) Please verify driver detected settings are correct.
<6>(scsi1) If not, then please properly set the device termination
<6>(scsi1) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
<6>(scsi1) during machine bootup.
<6>(scsi1) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO)
<6>(scsi1) Downloading sequencer code... 422 instructions downloaded
<4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
<4> <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
<4>scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
<4> <Adaptec AIC-7880 Ultra SCSI host adapter>
<4>scsi : 2 hosts.
<6>(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
<4> Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506
<4> Type: Direct-Access ANSI SCSI revision: 02
<6>(scsi0:0:2:0) Synchronous at 80.0 Mbyte/sec, offset 15.
<4> Vendor: SEAGATE Model: ST39102LW Rev: 0004
<4> Type: Direct-Access ANSI SCSI revision: 02
<6>(scsi1:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 15.
<4> Vendor: NEC Model: CD-ROM DRIVE:465 Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 8910423 [4350 MB] [4.4 GB]
<4> sda: sda1
<4>SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
<4> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.232 $ time 18:48:04 Sep 7 2000
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: Intel USB controller: setting latency timer to 0
<6>usb-uhci.c: USB UHCI at I/O 0xece0, IRQ 14
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>usb.c: USB new device connect, assigned device number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb.c: USB new device connect, assigned device number 2
<4>usb.c: This device is not recognized by any installed USB driver.
<6>Serial driver version 4.27 with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
<4>parport0: detected irq 7; use procfs to enable interrupt-driven operation.
<4>imm: Version 2.03 (for Linux 2.0.0)
<4>ppa: Version 2.03 (for Linux 2.2.x)
<4>WARNING - no ppa compatible devices found.
<4> As of 31/Aug/1998 Iomega started shipping parallel
<4> port ZIP drives with a different interface which is
<4> supported by the imm (ZIP Plus) driver. If the
<4> cable is marked with "AutoDetect", this is what has
<4> happened.
<4>Checking ReiserFS transaction log (device 08:15) ...
<4>Using tea hash to sort names
<4>ReiserFS core development sponsored by SuSE Labs (suse.com). Journaling sponsored
by MP3.com
<4>ReiserFS version 3.5.24
<6>Adding Swap: 248968k swap-space (priority -1)
<4>Checking ReiserFS transaction log (device 08:16) ...
<4>Using tea hash to sort names
<4>ReiserFS version 3.5.24
<4>Checking ReiserFS transaction log (device 08:17) ...
<4>Using tea hash to sort names
<4>ReiserFS version 3.5.24
<7>VFS: Disk change detected on device fd(2,0)
********************************************************************************
* ddebug.log
********************************************************************************
* second stage install running
* running: rmmod vfat
vfat: Device or resource busy
* running: rmmod msdos
rmmod: module msdos is not loaded
* running: rmmod fat
fat: Device or resource busy
* adding alias scsi_hostadapter to sd_mod
* adding alias block-major-11 to scsi_hostadapter
* adding alias scsi_hostadapter1 to scsi_mod
* running: packdrake -x /lib/modules.cz /tmp af_packet.o
extracting af_packet.o
* running: insmod_ -f /tmp/af_packet.o
* running: packdrake -x /lib/modules.cz /tmp usbcore.o
extracting usbcore.o
* running: insmod_ -f /tmp/usbcore.o
* running: packdrake -x /lib/modules.cz /tmp usb-uhci.o
extracting usb-uhci.o
* running: insmod_ -f /tmp/usb-uhci.o
* adding alias usb-interface to usb-uhci
* mounting /proc/bus/usb on /proc/bus/usb as type usbdevfs
* calling mount(/proc/bus/usb, /proc/bus/usb, usbdevfs, -1058209792, )
* running: packdrake -x /lib/modules.cz /tmp serial.o
extracting serial.o
* running: insmod_ -f /tmp/serial.o
* warning: rm of /usr/share/locale failed: No such file or directory
* running: packdrake -x /usr/share/locale.cz2 /usr/share/locale en
extracting misc/LC_MESSAGES
extracting iso8859-15/LC_MESSAGES
extracting misc/LC_NUMERIC
extracting iso8859-15/LC_NUMERIC
extracting iso8859-15
extracting misc/LC_MESSAGES/SYS_LC_MESSAGES
extracting misc/LC_TIME
extracting iso8859-15/LC_TIME
extracting iso8859-15/LC_CTYPE
extracting misc/LC_MONETARY
extracting iso8859-15/LC_COLLATE
extracting iso8859-15/LC_MONETARY
extracting en
* trying to load en_US.po from /usr/bin/perl-install/po.cz2
* trying to load en.po from /usr/bin/perl-install/po.cz2
* starting step `selectLanguage'
* loading keymap uk
* warning: failed to read kmap magic at /usr/bin/perl-install/keyboard.pm line 226,
<F> chunk 1.
* running: packdrake -x /usr/share/xmodmap.cz2 /tmp xmodmap.uk
extracting xmodmap.uk
* running: xmodmap /tmp/xmodmap.uk
xmodmap: unable to open display ''
* RPM_INSTALL_LANG: en
* running: consolechars -v -f lat0-sun16 -m iso15
Loading ACM from `/usr//lib/kbd/consoletrans/iso15.acm.gz'
Loading ACM from `/usr//lib/kbd/consoletrans/iso15.acm.gz'
Loading ACM from `/usr//lib/kbd/consoletrans/iso15.acm.gz'
Loading 256-chars 8x16 font from file `/usr//lib/kbd/consolefonts/lat0-sun16.psf.gz'.
Setting kernel SFM.
Loading ACM from `/usr//lib/kbd/consoletrans/iso15.acm.gz'
* step `selectLanguage' finished
* starting step `selectInstallClass'
* trying to load en_GB.po from /usr/bin/perl-install/po.cz2
* step `selectInstallClass' finished
* starting step `setupSCSI'
* running: packdrake -x /lib/modules.cz /tmp ide-mod.o
packdrake: unable to find file ide-mod.o in archive /lib/modules.cz
* missing module ide-mod
* running: packdrake -x /lib/modules.cz /tmp ide-probe.o ide-probe-mod.o ide-disk.o
cdrom.o ide-cd.o
packdrake: unable to find file ide-probe-mod.o in archive /lib/modules.cz
packdrake: unable to find file ide-probe.o in archive /lib/modules.cz
packdrake: unable to find file ide-disk.o in archive /lib/modules.cz
extracting cdrom.o
extracting ide-cd.o
* missing module ide-probe
* missing module ide-probe-mod
* missing module ide-disk
* running: insmod_ -f /tmp/cdrom.o
* running: insmod_ -f /tmp/ide-cd.o
* interactive_newt does not handle none stacked wait-messages
* interactive_newt does not handle none stacked wait-messages
* running: packdrake -x /lib/modules.cz /tmp parport.o
extracting parport.o
* running: insmod_ -f /tmp/parport.o
* running: packdrake -x /lib/modules.cz /tmp parport_pc.o
extracting parport_pc.o
* running: insmod_ -f /tmp/parport_pc.o
* running: packdrake -x /lib/modules.cz /tmp imm.o
extracting imm.o
* running: insmod_ -f /tmp/imm.o
/tmp/imm.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module imm failed at /usr/bin/perl-install/modules.pm line 477.
* interactive_newt does not handle none stacked wait-messages
* running: packdrake -x /lib/modules.cz /tmp ppa.o
extracting ppa.o
* running: insmod_ -f /tmp/ppa.o
/tmp/ppa.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters
* warning: insmod'ing module ppa failed at /usr/bin/perl-install/modules.pm line 477.
* interactive_newt does not handle none stacked wait-messages
* step `setupSCSI' finished
* starting step `selectMouse'
* step `selectMouse' finished
* starting step `selectKeyboard'
* loading keymap us-latin1
* warning: failed to read kmap magic at /usr/bin/perl-install/keyboard.pm line 226,
<F> chunk 1.
* running: packdrake -x /usr/share/xmodmap.cz2 /tmp xmodmap.us_intl
extracting xmodmap.us_intl
* running: xmodmap /tmp/xmodmap.us_intl
xmodmap: unable to open display ''
* RPM_INSTALL_LANG: en
* step `selectKeyboard' finished
* starting step `miscellaneous'
* perImageAppend:
* step `miscellaneous' finished
* starting step `doPartitionDisks'
* getFile XXX () relGetFile /XXX
* local getFile /tmp/rhimage//XXX
* calling umount(/tmp/hdimage)
* warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31.
* found a dos partition table on /dev/sda at sector 0
* warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31.
* found a dos partition table on /dev/sdb at sector 0
* win parts: sda1
* mounting sda1 on /tmp/tmp_fs_df as type vfat
* calling mount(/dev/sda1, /tmp/tmp_fs_df, vfat, 3236757505, check=relaxed)
* calling umount(/tmp/tmp_fs_df)
* partitioning wizard log:
>>wizlog>>Not enough free space to allocate new partitions: 313 < 1024000
* mounting sdb5 on /tmp/inspect_tmp_dir as type reiserfs
* running: packdrake -x /lib/modules.cz /tmp reiserfs.o
extracting reiserfs.o
* running: insmod_ -f /tmp/reiserfs.o
* calling mount(/dev/sdb5, /tmp/inspect_tmp_dir, reiserfs, 3236757505, )
* calling umount(/tmp/inspect_tmp_dir)
* suggest_mount_points: sdb5 -> /
* suggest_mount_points: sdb6 -> /usr
* suggest_mount_points: sdb7 -> /home
* default mntpoint / sdb5
* default mntpoint /usr sdb6
* default mntpoint /home sdb7
* mounting sda1 on /tmp/hdimage as type vfat
* calling mount(/dev/sda1, /tmp/hdimage, vfat, -1058209792, check=relaxed)
* step `doPartitionDisks' finished
* starting step `formatPartitions'
* preparing to format swap
* preparing to format /
* preparing to format /usr
* preparing to format /home
* formatting device sdb1 (type Linux swap)
* Setting up swapspace on /dev/sdb1 version 1, size = 254947328 bytes
* swapon called with sdb1
* interactive_newt does not handle none stacked wait-messages
* formatting device sdb5 (type Linux native)
* running: mke2fs /dev/sdb5
mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
76304 inodes, 305203 blocks
15260 blocks (5.00%) reserved for the super user
First data block=1
38 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185
Writing inode tables: 0/38 1/38 2/38 3/38 4/38 5/38
6/38 7/38 8/38
9/3810/3811/3812/3813/3814/3815/3816/3817/3818/3819/3820/3821/3822/3823/3824/3825/3826/3827/3828/3829/3830/3831/3832/3833/3834/3835/3836/3837/38done
Writing superblocks and filesystem accounting information: done
* mounting /dev/sdb5 on /mnt/ as type ext2
* calling mount(/dev/sdb5, /mnt, ext2, -1058209792, )
* mounting /dev/sda1 on /mnt/mnt/windows as type vfat
* calling mount(/dev/sda1, /mnt/mnt/windows, vfat, -1058209792, check=relaxed)
* warning: mount failed: Device or resource busy at /usr/bin/perl-install/fs.pm line
216.
* interactive_newt does not handle none stacked wait-messages
* starting step `doPartitionDisks'
* getFile XXX () relGetFile /XXX
* local getFile /tmp/rhimage//XXX
* calling umount(/tmp/hdimage)
* unmounting all filesystems
* calling umount(/mnt/)
* warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31.
* found a dos partition table on /dev/sda at sector 0
* warning: bad magic number at /usr/bin/perl-install/partition_table_empty.pm line 31.
* found a dos partition table on /dev/sdb at sector 0
* win parts: sda1
* mounting sda1 on /tmp/tmp_fs_df as type vfat
* calling mount(/dev/sda1, /tmp/tmp_fs_df, vfat, 3236757505, check=relaxed)
* calling umount(/tmp/tmp_fs_df)
* partitioning wizard log:
>>wizlog>>Not enough free space to allocate new partitions: 313 < 1024000
* mounting sdb6 on /tmp/inspect_tmp_dir as type reiserfs
* calling mount(/dev/sdb6, /tmp/inspect_tmp_dir, reiserfs, 3236757505, )
* calling umount(/tmp/inspect_tmp_dir)
* mounting sdb7 on /tmp/inspect_tmp_dir as type reiserfs
* calling mount(/dev/sdb7, /tmp/inspect_tmp_dir, reiserfs, 3236757505, )
* calling umount(/tmp/inspect_tmp_dir)
* suggest_mount_points: sdb6 -> /usr
* suggest_mount_points: sdb7 -> /home
* default mntpoint sdb5
* default mntpoint /usr sdb6
* default mntpoint /home sdb7
* mounting /dev/fd0 on /fd0 as type vfat
* running: packdrake -x /lib/modules.cz /tmp fat.o
extracting fat.o
* running: insmod_ -f /tmp/fat.o
insmod: a module named fat already exists
* running: packdrake -x /lib/modules.cz /tmp vfat.o
extracting vfat.o
* running: insmod_ -f /tmp/vfat.o
insmod: a module named vfat already exists
* running: packdrake -x /lib/modules.cz /tmp fat.o
extracting fat.o
* running: insmod_ -f /tmp/fat.o
insmod: a module named fat already exists
* running: packdrake -x /lib/modules.cz /tmp msdos.o
extracting msdos.o
* running: insmod_ -f /tmp/msdos.o
* calling mount(/dev/fd0, /fd0, vfat, -1058209792, check=relaxed)
********************************************************************************
* install.log
********************************************************************************
