Hello,
I don't know why everyday I'm receiving a lot of email from
[EMAIL PROTECTED] [EMAIL PROTECTED], could you help me to
avoid receiving this kind of e-mail anymore?.
I'll appreciate your help.
Oscar
----- Original Message -----
From: "Udo Weber" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 03, 2000 6:57 AM
Subject: [Cooker] cdrecord does not work on ide-scsi
> Hi,
> since a long time I try to configure the CD-burning on Mandrake, I don't
> have success until now.
> Always when I try to burn, eg. with X-cd-roast, I get following error:
>
>
****************************************************************************
*********
>
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,1,0'
> scsibus: 0 target: 1 lun: 0
> Linux sg driver version: 2.1.39
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'IDE-CD '
> Identifikation : 'ReWritable-2x2x6'
> Revision : '3.01'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 786432 = 768 KB
> Current Secsize: 2048
> ATIP start of lead in: -11598 (97:27/27)
> ATIP start of lead out: 336601 (74:50/01)
> Disk type: Phase change
> Manuf. index: 20
> Manufacturer: Princo Corporation
> Blocks total: 336601 Blocks current: 336601 Blocks remaining: 336751
> Starting to write CD/DVD at speed 1 in write mode for single session.
>
> Blanking PMA, TOC, pregap
> CDB: A1 01 00 00 00 00 00 00 00 00 00 00
> cdrecord: Input/output error. blank unit: scsi sendcmd: retryable error
> Sense Bytes: F0 00 05 00 00 00 00 19 00 00 B6 00 20 00 00 80
> status: 0x2 (CHECK CONDITION)
> Sense Key: 0x5 Illegal Request, Segment 0
> cdrecord: Cannot blank disk, aborting.
> Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
> Sense flags: Blk 0 (valid) error refers to data part, bit ptr 0 (not
> valid) field ptr 0
> cmd finished after 11.021s timeout 9600s
> CDB: 1B 00 00 00 02 00
> cdrecord: Input/output error. start/stop unit: scsi sendcmd: retryable
> error
> Sense Bytes: F0 00 04 00 00 00 00 19 00 00 B6 03 53 00 00 80
> status: 0x2 (CHECK CONDITION)
> Sense Key: 0x4 Hardware Error, Segment 0
>
>
***************************************************************************
>
> here the output from dmesg:
>
>
***************************************************************************
>
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: E-IDE Model: CD-ROM 50X Rev: 41
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Vendor: IDE-CD Model: ReWritable-2x2x6 Rev: 3.01
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
> sr0: scsi3-mmc drive: 4x/50x cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.11
> sr1: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> VFS: Disk change detected on device sr(11,0)
> ISO 9660 Extensions: Microsoft Joliet Level 1
> ISO 9660 Extensions: RRIP_1991A
>
>
***************************************************************************
>
> In the past I had some experiences with SuSE - I got it to work there
> but never on Mandrake.
>
> Is there anything additional what I have to do ?
>
> Thanks for any help
> Udo
>
>
>
