I don't know if this is a Cooker issue, a kernel issue, a cdrecord issue, or
if I'm clueless - this is my first experience with a CD recorder on Linux.
[ewilts@linux1 ewilts]$ rpm -q cdrecord
cdrecord-1.9-3mdk
I'd appreciate any comments anyone can give me on what might be wrong. This
is starting to drive me nuts...
Thanks,
.../Ed
[root@linux1 ewilts]# cdrecord -v -blank=all /backup/iso/1-Cooker-i586.iso
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W54E '
Revision : '1.1B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1300480 = 1270 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 623 MB
Total size: 715 MB (70:55.72) = 319179 sectors
Lout start: 716 MB (70:57/54) = 319179 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11597 (97:27/28)
ATIP start of lead out: 336601 (74:50/01)
speed low: 0 speed high: 4
power mult factor: 5 6
recommended erase/write power: 3
A2 values: 00 00 00
Disk type: Phase change
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 336601 Blocks current: 336601 Blocks remaining: 17422
RBlocks total: 346489 RBlocks current: 346489 RBlocks remaining: 27310
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Blanking entire disk
cdrecord: faio_wait_on_buffer for writer timed out.
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
I get several hundred of these messages, and then finally:
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: Numerical argument out of domain. Cannot send SCSI cmd via ioctl
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
--
Ed Wilts, Mounds View, MN, USA
mailto:[EMAIL PROTECTED]