Hi, I was able to install latest cooker (/, /var, etc.) on different md:s.
The install complained that there's no boot loaders capable of booting /boot from a md, but lilo seemed to cope just fine (!). There are some problems though that I don't know how to deal with, check the attached files. Another issue I stumbled into was that the mbr sector was not over/re-written. Previously I had system commander and some windows installations on the first disk, and now system commander asks which partition to boot. Since I nuked all my partitions with the install diskdrake version I assumed this would not happen. My hardware is Abit BP6 and 2 IBM 30GB (batch), one disk on each HPT 366 controller channel. Chears. -- Regards // Oden Eriksson
The following section of this message contains a file attachment
prepared for transmission using the Internet MIME message format.
If you are using Pegasus Mail, or any another MIME-compliant system,
you should be able to save it or view it from within your mailer.
If you cannot, please ask your system administrator for assistance.
---- File information -----------
File: messages.gz
Date: 3 Mar 2002, 14:57
Size: 6968 bytes.
Type: Unknown
messages.gz
Description: Binary data
raiddev /dev/md0
raid-level 1
chunk-size 64k
persistent-superblock 1
nr-raid-disks 2
device /dev/hde1
raid-disk 0
device /dev/hdg1
raid-disk 1
raiddev /dev/md1
raid-level 1
chunk-size 64k
persistent-superblock 1
nr-raid-disks 2
device /dev/hde5
raid-disk 0
device /dev/hdg5
raid-disk 1
raiddev /dev/md2
raid-level 1
chunk-size 64k
persistent-superblock 1
nr-raid-disks 2
device /dev/hde6
raid-disk 0
device /dev/hdg6
raid-disk 1
raiddev /dev/md3
raid-level 1
chunk-size 64k
persistent-superblock 1
nr-raid-disks 2
device /dev/hde7
raid-disk 0
device /dev/hdg7
raid-disk 1
raiddev /dev/md4
raid-level 1
chunk-size 64k
persistent-superblock 1
nr-raid-disks 2
device /dev/hdg9
raid-disk 0
device /dev/hde9
raid-disk 1
/dev/md0 / ext3 defaults 1 1 none /dev/pts devpts mode=0620 0 0 none /dev/shm tmpfs defaults 0 0 /dev/md4 /home ext3 defaults 1 2 /dev/hdc /mnt/cdrom iso9660 iocharset=iso8859-1,ro,nosuid,noauto,exec,user,nodev 0 0 /dev/fd0 /mnt/floppy vfat iocharset=iso8859-1,umask=0,sync,nosuid,user,noauto,nodev,codepage=850,unhide 0 0 none /proc proc defaults 0 0 none /tmp tmpfs defaults 0 0 /dev/md2 /usr ext3 defaults 1 2 /dev/md1 /var ext3 defaults 1 2 /dev/md3 /var/qmail/queue ext3 sync 1 2 /dev/hde8 swap swap defaults 0 0 /dev/hdg8 swap swap defaults 0 0
