-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Only for info.... ...from my laptop Dell Inspiron 7500
It seems acpi working better now ....;o) ========================== #ls -R /proc/acpi/ /proc/acpi: ac_adapter/ alarm battery/ button/ dsdt embedded_controller/ event fadt fan/ info power_resource/ processor/ sleep thermal_zone/ /proc/acpi/ac_adapter: AC/ /proc/acpi/ac_adapter/AC: state /proc/acpi/battery: BAT0/ BAT1/ /proc/acpi/battery/BAT0: alarm info state /proc/acpi/battery/BAT1: alarm info state /proc/acpi/button: lid/ power/ sleep/ /proc/acpi/button/lid: LID/ /proc/acpi/button/lid/LID: info /proc/acpi/button/power: PWRB/ /proc/acpi/button/power/PWRB: info /proc/acpi/button/sleep: SBTN/ /proc/acpi/button/sleep/SBTN: info /proc/acpi/embedded_controller: EC0/ /proc/acpi/embedded_controller/EC0: info /proc/acpi/fan: FAN0/ FAN1/ /proc/acpi/fan/FAN0: state /proc/acpi/fan/FAN1: state /proc/acpi/power_resource: PFN0/ PFN1/ /proc/acpi/power_resource/PFN0: state /proc/acpi/power_resource/PFN1: state /proc/acpi/processor: CPU0/ /proc/acpi/processor/CPU0: info limit performance power throttling /proc/acpi/thermal_zone: THRM/ /proc/acpi/thermal_zone/THRM: cooling_mode polling_frequency state temperature trip_points # ========================== cu...and good work...;o) - -- Franco Silvestro c/o CeSIA - Alma Mater Studiorum - Universita' di Bologna 'lynx -source http://www.reti.unibo.it/FrancoSilvestro.asc | gpg --import' Key fingerprint = 3145 1309 C5D8 7B3F 2582 44D2 91BB ACAB E010 ABF9 Current Linux uptime: 0 hours 45 minutes. Linux Version 2.4.20-0.2mdk, Compiled #1 Thu Nov 21 15:31:10 CET 2002 /proc/acpi/thermal_zone/THRM/temperature: 55 C - ----------------------------------------- Fri Nov 22 00:05:18 CET 2002 - ----------------------------------------- Mandrake Linux Cooker-i586 20021121 21:18 One 650MHzIntelPentium III Processor, 512M RAM -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE93Wjtkbusq+AQq/kRAugqAJ9FmP0AnE0QI57blG+TxU4jQdTyXACeL9d/ tWCpKzE5HxC6K3kgxakFLY4= =44HR -----END PGP SIGNATURE-----
Linux version 2.4.20-0.2mdk ([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake Linux 9.1 3.2-4mdk)) #1 Thu Nov 21 15:31:10 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data) BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 DELL ) @ 0x000f71c0 ACPI: RSDT (v001 DELL I 7500 01540.00000) @ 0x1fffb01a ACPI: FADT (v001 DELL I 7500 01540.00000) @ 0x1ffffb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1ffffbd9 ACPI: DSDT (v001 DELL I 7500 01540.00000) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Dell Inspiron with broken BIOS detected. Refusing to enable the local APIC. Kernel command line: auto BOOT_IMAGE=linux ro root=349 devfs=mount Initializing CPU#0 Detected 651.489 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1300.88 BogoMIPS Memory: 515904k/524224k available (1277k kernel code, 7932k reserved, 486k data, 140k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021115 PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 PCI: Using configuration type 1 ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 14 15) ACPI: Embedded Controller [EC0] (gpe 9) schedule_task(): keventd has not started ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' PCI: Cannot allocate resource region 4 of device 00:07.1 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 vesafb: framebuffer at 0xfd000000, mapped to 0xe080a000, size 8128k vesafb: mode is 1280x1024x16, linelength=2560, pages=2 vesafb: protected mode interface info at c000:506a vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1280x1024, 45593 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DARA-225000, ATA DISK drive hdb: IBM-DJSA-230, ATA DISK drive hdc: IBM-DARA-225000, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c030a2ac, I/O limit 4095Mb (mask 0xffffffff) hda: 49577472 sectors (25384 MB) w/418KiB Cache, CHS=3278/240/63, UDMA(33) blk: queue c030a3e8, I/O limit 4095Mb (mask 0xffffffff) hdb: 58605120 sectors (30006 MB) w/1874KiB Cache, CHS=3876/240/63, UDMA(33) blk: queue c030a618, I/O limit 4095Mb (mask 0xffffffff) hdc: 49577472 sectors (25384 MB) w/418KiB Cache, CHS=49184/16/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 > /dev/ide/host0/bus1/target0/lun0:<6> [PTBL] [3278/240/63] p1 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 66k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Mounted devfs on /dev Freeing unused kernel memory: 140k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 16:14:15 Nov 21 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error Adding Swap: 453560k swap-space (priority -1) Adding Swap: 453560k swap-space (priority -2) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SBTN] ACPI: Fan [FAN0] (on) ACPI: Fan [FAN1] (on) ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [THRM] (66 C)