https://qa.mandrakesoft.com/show_bug.cgi?id=894
------- Additional Comments From [EMAIL PROTECTED] 2003-01-29 10:07 ------- I had pulled the hard drive (22 GB) from this machine to temporarily fix a broken ReplayTV (long story) and today I put it back in. Since it had the ReplayTV file system on it, I completely repartitioned it. I installed 9.1 beta 2 in a 4 GB partition, and noticed that the sound worked but the network did not. (I reinstalled because I wanted to be sure.) To be completely sure, I created another 4 GB partition for 9.1 beta 1, and installed it. As I experienced before, the sound does not work -- but the network DOES. I am actually posting this comment from 9.1 beta 1 on the celeron machine. So my question is this: is it possible for me to pull the RPMs for sound from 9.1 beta 2, so that I can have a machine with all peripherals working? If so, which RPMs should I use? And if you have a fix for the network, I'll gladly try it on the 9.1 beta 2 partition which I still have. Anything I can do to help. Thanks. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] description: I have a Celeron on a SIS motherboard. The network, sound, and video are all embedded on the motherboard. The network portion, configured as sis900, worked in 9.1 beta 1 but I cannot make a connection in 9.1 beta 2. Also, when I go in the Mandrake Control Center, click on Network & Internet, it shows the state as "up" but the section above that says "Internet Access" "Status: not connected" and a box for "Connect...". If I click on "Expert Mode" 2 new boxes appear, "Configure Internet Access..." and "Configure Local Area Network...". If I click on either of the two "Configure" boxes, I am returned to the main Control Center page! If I click on "Connect...", nothing appears to happen (no dialogs appear, and I'm able to click on other boxes on the page so the UI returned control to me). Also, sometimes when I click on "Network & Internet" I have to Alt+Tab to another application and Alt+Tab back before the screen will update. I tried clicking on the "Wizard..." button, to try to reconfigure the network, and it went through once okay and then started the wizard a second time, and when it got to the hostname page I could not click in the text field. I *could* click "Previous" and did, then clicked "Next" but still couldn't enter any text (and the field was empty, rather than having the "celeron.kenbeal.com" which it had the first time through). I just restarted the Control Center and was able to run the Wizard correctly (and it only ran once). The card is "up" but the status is still "not connected". And if I click on "Connect...", the card goes to "down". One good thing changed between 9.1 beta 1 and beta 2: my sound was not working under beta 1, but is working under beta 2! (The sound is sis 7018 PCI audio.)