https://qa.mandrakesoft.com/show_bug.cgi?id=1129
------- Additional Comments From [EMAIL PROTECTED] 2003-01-29 20:43 ------- Created an attachment (id=134) --> (https://qa.mandrakesoft.com/attachment.cgi?id=134&action=view) /proc/mdstat for testing This is my /proc/mdstat for testing double-digit md devices. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: __UNKNOWN__ description: This is a bug report for Mandrake 9.1 Beta2. The system the install was attempted on has the following software raid devices (auto-detect): /dev/md5 - RAID5 /dev/md6 - RAID5 /dev/md7 - RAID5 /dev/md8 - RAID5 /dev/md11 - RAID1; used in /dev/md13 /dev/md12 - RAID1; used in /dev/md13 /dev/md13 - RAID 1+0 (striping accross the md11 and md12 mirrors) /dev/md14 - RAID1; used in /dev/md16 /dev/md15 - RAID1; used in /dev/md16 /dev/md16 - RAID 1+0 (striping accross the md14 and md15 mirrors) /dev/md17 - RAID5 /dev/md18 - RAID5 /dev/md19 - RAID5 cat'ing /proc/mdstat from the command prompt during the install process shows all RAID devices working properly. PROBLEM: The disk partitioning utility in drakx does not seem to be able to deal with md devices beyond /dev/md9. It detects md5-md8 fine, but lists /dev/md19 as "md1" and does not detect md11-md18 at all. When one chooses the individual partitions that make up md19, though, it does list the partitions as part of md19. The issue resides in the fact that under the "RAID" tab, md19 is listed as md1 and none of the md devices beyond md8 are in the "RAID" tab. This is also the case when one selects the "use existing partitions" tab. md19 is listed as md1 and no devices beyond md8 are listed at all. This bug exists in both the graphical, text and expert modes. I suspect it is something as simple as editing the scripts to be able to handle double-digit md devices and to check for partitions on md devices beyond md9, but I am not familiar with the install code. If you have any questions feel free to send me an email at "[EMAIL PROTECTED]" and I will happily answer.
