https://qa.mandrakesoft.com/show_bug.cgi?id=1454
------- Additional Comments From [EMAIL PROTECTED] 2003-02-10 04:13 ------- For the record, I have always had better luck with the prism2 drivers than the orinoco drivers. The prism2 drivers are in the Mandrake kernels but to configure them you have to use the prism2-utils package from Cooker contribs. -- Aaron ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When using the new orinoco_cs instead of the old but working and now missing wvlan_cs, the following happens: Feb 9 18:13:55 localhost cardmgr[23748]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter Feb 9 18:13:55 localhost kernel: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> Feb 9 18:13:56 localhost kernel: orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: eth1: Station identity 001f:0001:0007:0034 Feb 9 18:13:56 localhost kernel: eth1: Looks like a Lucent/Agere firmware version 7.52 Feb 9 18:13:56 localhost kernel: eth1: Ad-hoc demo mode supported Feb 9 18:13:56 localhost kernel: eth1: IEEE standard IBSS ad-hoc mode supported Feb 9 18:13:56 localhost kernel: eth1: WEP supported, 104-bit key Feb 9 18:13:56 localhost kernel: eth1: Station name "HERMES I" Feb 9 18:13:56 localhost kernel: eth1: ready Feb 9 18:13:56 localhost kernel: eth1: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f Feb 9 18:13:56 localhost /etc/hotplug/net.agent: invoke ifup eth1 Feb 9 18:13:57 localhost kernel: eth1: Error -5 writing Tx descriptor to BAP Feb 9 18:13:58 localhost last message repeated 627 times The system load gets up to 100%. After removing the card, the system load returns to normal. I've also tested this with another lucent card using firmware 6.16: same as above.